answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What is the recommended torque spec for tightening F-connectors to a tap port or ground block?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the recommended tightening torque a2-70 socket head cap screw?

35


What is the install torque for craftsman 20 inch lawnmower blade?

Recommended tightening torque is 35-40 ft. lbs.


What is the connecting rod torque for 4dr5 Mitsubishi diesel engine?

Tightening bolt torque


What is the 2002 Sport trac lug nut torque requirements?

The recommended torque requirement for a 2002 Ford Sport Trac is 100 foot pounds. Be sure to properly tighten the lug nuts as over tightening will lead to the stud breaking under the pressure.


What is the difference between breakaway torque and rotational torque?

Breakaway torque is the torque required to start the initial movement, in the loosening direction, of a bolt, screw, or nut from its (non−loaded) at rest position with the locking element engaged. Tightening torque is the torque necessary to move the bolt, screw, or nut along its threaded length in the tightening direction.


Daewoo leganza head bolt torque tightening pattern?

I need a picture of a leganza deawoo head bolt tightening patern


What is the torque for 1985 Celebrity heads?

I would recommend that you consult a repair manual for torque values as well as tightening sequence


What is the tightening torque for a Honda civic crown wheel to the differential?

90 N


What is the pattern for tightening the head bolts and how tight do you torque them for a 2001 cavalier 2.2 motor?

Go to Autozone or a NAPA parts store and buy a Haynes Manual for the vehicle. It will tell you all of the torque specs you need and the tightening pattern.


What is the proper tightening torque for a 1991 Toyota pickup oil drain plug?

39nm


What is the cylinder head torque settings of the opel astra 1600 16 valve ecotec motor?

torque specs in Nm and tightening esquence


What is fiat punto head bolt tightening sequence and torque?

It is important to know the head bolt tightening sequence and the torque of a vehicle. For the Fiat Punto it is 20nm, 30nm, 90 degree turn, 90 degree turn, then in order 8,6,2,5,10,7,3,1,4,9.