Best Answer

There are four ways to find a ratio.

1 A dealer can normally tell from the vin number.

2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement

info.

3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.

4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.

Q: What is the rear end gear ratio on a 1993 gm 1500?

Write your answer...

Submit

Still have questions?

Related questions

If the front is 3.55, then the rear needs to be 3.55

The most likely ratio is 3.55-1.

3.55 or 4.10 : 1

i believe it would be 3.11

Could be 3.55, or 4.10:1

They used a few of them. Open the cover, count the teeth on the big gear ( the ring gear ) next count the teeth on the small gear ( the pinion gear). Divide the big gear by the little gear and that is your ratio.

it will be the same as the rear diff

my truck is a 2 wheel drive ext cab with a 5.7{.350} engine. its a 1500 i have a new rear end from a v-6. i need to know if the gears are the same or are close enough to be used?

2.833 is the rear-end gear ratio

The rear end gear ratio on a 1980 Oldsmobile is 3.73, in the overdrive gear. The low gear ratio is 1.43.

a safe-t-track rear end has RPO code G80-which is a positraction rear end and a 3.23:1 gear ratio was available having the RPO code GU5

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.