Best Answer

That's called a windage tray.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the name of the tray that's inside the oil pan and bolts to the main bearing caps in a ford 4.0 V6?
Write your answer...
Still have questions?
magnify glass
Related questions

Why is it important to replace the bearing caps in their original position?

Con rod and big end bearing caps are line bored at the manufacturing stage. Replacing the caps in the original positions keeps the caps in line to the original machining. By mixing the caps, you could well run the risk of running the bearings inside the caps

What is the torque sequence and specs for camshaft bearing caps on a 1996 Mitsubishi 3000gt?

The 12mm bolts on each end bearing cap should be torqued to 14 ftlbs. The 10mm bolts on the bearing caps in between should be torqued at 8 ftlbs. This is from the Mitsubishi 6G7 overhaul manual for the DOHC engine. next time post your engine, if is turbo or not... that will help

What is the torq spec of a 1996 350 crankshaft bearing caps?

If it's a 4 bolt Then the outer bolts for #2, 3 and 4 caps are 70 ft lbs all others bolts are 80 ft. lbs If its a 2 bolt main engine the torque spec's are 80 FT. lbs For all caps.

What are bearing caps?

You have rod bearing caps that hold the rods on the crankshaft. And you also have main bearing caps that hold the crankshaft in the engine block. NEUTZ.

What is the torque specs for the ring gear bolts on a GM 7.5 differential?

Ring gear 90 ft pounds Bearing caps 60 ft pounds

What are the torque specs for 1999 Saturn dohc main bearing caps?

The 1999 Saturn main bearing cap torque specifications are 160 pounds per square inch. The main bearing cap bolts should be torqued in 40 pound intervals.

What is the torque for the 1974 Dodge Dart 318 rear main seal cap bolts?

All main bearing caps should be tightened to 85 foot-pounds.

What are the torque settings for ring gear and carrier bearings on a Discovery 1 rear axle?

Crown wheel bolts 58Nm, use `Loctite Studlock` Bearing caps 90Nm.

What are the torque setting of the main bearing caps and rod bearing caps on a Toyota 2C Engine bolt main block?

the torque setting for the the main bearings of the Toyota 2c engine is 103 Nm. The rid bearing caps are 59 Nm

How do you replace bearing caps on a 350 are they all the same i lost a bearing cap can i use any bearing cap from any 350?

You can purchase new or used bearing caps, but there is machine work required. If you are talking about main bearing caps, the block will need to be line bored with the new cap in place. If you're talking about a connecting rod bearing cap, the rod will need to be resized with the new bearing cap in place.

What are the torque setting of the main bearing caps and rod bearing caps on a Chevy 350 4 bolt main block?

inner main caps 70 ft. lbs, outer main caps 65 ft. connecting rod torques are 45 ft. lbs (caps)

When torquing a Chevrolet motor what does inner and outer mean?

If you are talking about torquing down the main bearing caps, the two inner bolts are the ones closest to the center of the cap, and the outers are furthest away.