0
What is the gap setting for roller rockers on small block Chevy?
Wiki User
∙ 15y ago
If you are asking about backlash, the setting for a solid cam would be on the cam card. Hydraulic cams don't have backlash, they have pre-load, which is usually about 1/2 turn.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Can you put roller rockers on a factory small block Chevy v8?
yes
Modifications needed to run roller rockers on a small block Chevy engine?
If its the standard height, nothing. If they are screw in studs with tall nuts, then you will need tall valve covers.
Will dodge 5.9 mag rockers work on small block Chevy?
No.
Setting valves on 350 with hydralic lifters and roller rockers?
Chevy 350 small block engines with hydralic lifters set at 0 lash. That means start the engine and adjust the valve until it just quits clicking. Then tighten the nut approx 3/4-1 turn then set the next one.
How many rockers are needed for a small block Chevy?
It has 8 intakes and 8 exhaust if it's a V-8 engine.
What old style small block chevy came with 1.6 rocker arms?
1.6 ratio rockers were only offered in the aftermarket.
What is the biggest cam you can put in a small block Chevy?
I ground roller cams for Erson, that were up to .650 lift.
What are the specs on the rockers on a Pontiac 400 small block?
no such thing as a pontiac small blockstock they rockers were 1.5 ratio
What is the point gap setting for a Chevy big block?
.017, or, a matchbook cover, works great.
Will roller lifters in a 1998 vortec 350 work in a 1986 350 block?
NO. The 86 is not a roller block.
Your big block Chevy wont oil the rockers?
Oil level low, low oil pressure, or a clogged filter, if the bypass is not working. From there I would say maybe a clogged oil journal.
What is the usual cause of the number one cylinder lifters to be tapping in a Chevy small block 305?
Could be, Out of adjustment Worn camshaft Worn lifters Worn pushrods Worn rockers All of the above.
