0
It makes things easier by putting rope through on end and pulling a weight up with little effort
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the function of snub pulley?
Snub pulleys are used to increase the angle of wrap of the driver pulley or and to change the direction of belt(deflector pulley)
What is a compound pulley?
a coumpound pulley is when there is a fixe pulley and movable pulley working together
How many type in pulley machine?
Pulley machine type of many! Machine have many pulley, many pulley machine! Type machine, many pulley type. Pulleys, type pulley machine many type. Machine.
Unlike a fixed pulley a movable pulley the?
multiply
Who discovered pulley?
The simple pulley was invented in ancient times by an unknown person. The compound pulley was invented by Archimedes.
Where is top dead centre on camshaft pulley mk 2 vw golf gti?
The camshaft TDC mark is located on the camshaft side of the pulley wheel. When the mark is level with the front reinforcing strip on the camshaft cover the camshaft will be at TDC.
Does a camshaft pulley interchange with a 1990 Honda accord to a 1992 Honda accord?
Yes it does interchange. 1990-1993 Accords have the same camshaft pulley (or cog).
Where are the timing marks on a 1995 Escort 4-cylinder?
One is on the crankshaft pulley the other is on the camshaft pulley.
What is the function of a sewing machine pulley?
what is the function of a pulley in a sewing machine
Do you need to remove camshaft pulley to get to distributor cap screws on 94 caprice?
Remove crankshaft pulley& ballance
Where are the timing marks on the cam and the crank located on a Toyota Camry 4cl 2.2?
The crankshaft itself has no marks, the crankshaft pulley has one, it's white color. The same is true for the camshaft, it has no marks. But the camshaft pulley has a hole in it. That hole must alighed with the mark behind the pulley and the crankshaft should alighed with its own mark and the camshaft in the same time.
Where is a pulley and belt used?
pulley an belt are used in driving camshaft,alternator,water pump,air pump, compressor in a car.
What is the function of a movable pulley?
functions of movable pulley
How do you set the timing on 2002 Kia Rio?
This is the procedure for installing the timing belt, and contains the info on where all marks need to be set for proper timing: Install : 1.Install tensioner pulley 2.Pull tensioner pulley to its furthest point and tighten lock bolt. 3.Check that timing mark on timing belt pulley is aligned with timing mark on engine http://msw.kiausa.com/data/manual/sh...G/lc3b620a.gif 4.Check that "I" mark on intake camshaft pulley is aligned with mark on seal plate and "E" mark on exhaust camshaft pulley is aligned with mark on seal plate. http://msw.kiausa.com/data/manual/sh...G/lc3b620b.gif 5.Install timing belt onto timing belt pulley first, then idler pulley, exhaust camshaft pulley, intake camshaft pulley, and tensioner pulley in that order. 6.Check that there is no looseness in belt between idler pulley and exhaust camshaft pulley or between intake and exhaust camshaft pulleys. 7.Loosen tensioner pulley lock bolt and allow tensioner spring to apply tension to timing belt. 8.Tighten tensioner pulley lock bolt to specified torque. Tightening torque:28~38 lb-ft (38~51 N
Where is camshaft pulley ignition timing location for 1992 Toyota Corolla?
where is camshalf pulley ignition timing location for 1992 Toyota corolla?
How do you find crankshaft sensor on Fiat marea?
It's behind one of the camshaft pulleys. Why would a CRANKSHAFT position sensor be behind a CAMSHAFT pulley ??
Do you turn camshaft pulley clockwise or counterclockwise to line up marks?
Always clockwise.
