Want this question answered?
excessive We were taught 2-1/2 times the width of the electrode was maximum. ie: 5/16" width weld bead for 1/8" electrode.
A narrow, straight weld bead that is created by moving the SMAW electrode straight along the weld joint. A quality stringer bead should have good tie-in on both sides of the weld.
in reference to the acutal weld metal-it is the "bead", what you see on top.
A small "pool" of molten metal that is manipulated to crate a weld bead.
A bead is a compleated weld pass. Just like a bead of glue or adhesive, it is the same way. A compleatley bonded joint.
3 bead cap
When a welder makes a small weld bead to "tack" a joint together so it will not move. This makes it easier to weld a joint without having to clamp it.Tack welding is when a welder makes a small bead to "tack" the metal into place for the final welding.
what characteristics does the weld bead have when weaving the electrode
flat
There are 4 basics to producing a good weld bead. Correct #1 Amperage #2 Electrode Angle #3 Arc Length #4 Travel Speed Factor in electrode manipulation in some cases.
in reference to the acutal weld metal-it is the "bead", what you see on top.
2.5 to 3.0 times of the dia of the weld rod