0
They are two types of filing used to finish off a piece of metal by smoothening it a giving it a shine and make your work neater...
cross filing is to quickly remove material down to a line...
and draw filing is to get a smooth finish!
Wiki User
∙ 13y ago
Wiki User
∙ 14y agoDraw and cross filing are techniques used in Design Technology to smooth down rough edges.
Add your answer:
Earn +20 pts
Common research questionnaire about modern technology like computer?
draw a questionnaire about importance of modern technologies in your life?
What is the different steps in bisecting a line?
1. first draw a line any measurements 2. then get your compass and place it on the left side of your line remembering that the compass has to be more than halfway open then go up to the middle with ur compass and draw one half of a cross with the compass then draw another half a cross below the line not changing the width of the compass but make sure it is in line with the other half cross now take the compass of your page now place the point on the other side of the line and do the same as i just said then you should get two crosses one above the line and one below the finishing touch is get a ruler and where the crosses meet draw a line strainght the way down and then your done i hope that helped i learnt it in a maths lesson
What is the equipment used before cad?
CAD stands for Computer Aided Design. CAD most commonly refers to software that helps design products. This software needs a computer to run, most are designed for windows, you may be able to find some that run on mac as well. Some of the most popular professional CAD programs are made by the company Autodesk, and are used to create computer models and designs of everything from spoons to skyscrapers.
What is autocad draftsman?
An AutoCAD is a computer program used by many technical disciplines to draw precise, concise, and comprehensive diagrams depicting construction and fabrication techniques and/or layout plans to scale. CAD stands for computer aided drafting or computer aided design and drafting.
What are the major contributors of computer architecture?
According to the Testing department point of view, a Computer architecture is the person who breaks the project into different modules. It is his responsibility to draw the diagrams for the modules using a very famous language UML which is unified modelling language. All this is done by Computer architecture in the Design Phase of the Software Development Life cycle
Which comes first when finishing acrylic draw filing or cross filing?
Draw filing
What cross filing and draw filing?
draw filing is used to make a very smooth and true surface.
What is the difference between cross filing and down filing?
Cross filling removes material and draw filing smooths it down
What is the difference between cross filing an draw filing?
something to do with something
What is the difference between cross and draw filing?
Cross filing and draw filing are two methods of using a file to shape or smooth a metal workpiece. Cross filing is done by moving the file across the surface of the workpiece at a right angle to its axis, while draw filing is done by moving the file along the length of the workpiece parallel to its axis. Cross filing is used to remove more material quickly and roughly, while draw filing is used to produce a finer and smoother finish.
What is cross filing and draw filing used for?
Draw filing is when the file is pushed across the surface from one edge of the file to the other. This results in a smoother cut.
Why do you draw file after cross filing to shape?
Draw filing will result in a higher quality finish, as the grain will be parallel to the edge of the work (therefore the surface area of the egde will be less, ie: smoother)
How do you cross file and draw file?
Cross filing is done by pushing the file backwards and forwards at a slight angle to remove as much material as possible as quick as possible. Draw filing is done by using the file sideways along the edge of a piece to produce a good finish an remove very little material
What is the difference between cross filing and draw filing?
Cross filling is made across the surface to be filed from tip to handle, which gives a smoother cut. Draw filling on the other hand, is done across the surface by moving from one edge of the file to the other.
Which technology helps a computer artist to create a design?
Design Software (Adobe CS4, Corel Draw & AutoCAD, Inventor, Showcase) helps computer artists to create design.
How do you draw a coin design?
you look at it and then draw it.
How is design related to art?
its what u draw so like eg. if i draw a dress thats art and what i draw ill design i
