0
clutch is used to engage or disengage gears wher as brake is used to reduce i.e to retard the motion.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What is the difference between single plate clutch and multi plate clutch?
"What is the difference between single plate clutch and multi plate clutch?"
What is the difference between a clutch and an accelerator?
vehicle wise, a clutch is to help you change gears and the accelerator is to accelerate the vehicle in the preferred direction (forwards/ Backwards). in a car the clutch is normally the foot pedal on the left and the accelerator is on the right. Both of the pedals are on either side of the break.
What is the difference between cut in and break down voltage?
what is the difference between cut- in and cut -out
The difference between Break Even Concept and Break Even Chart?
its a pinaplle under the sea
What is the difference between a throwout bearing and a clutch release bearing?
Both are the same term for the same part.
What is the difference between clutch control and coasting?
Is clutch control using the accelerator and simultaneously using the clutch to control the speed of the car and coasting is when your car is still moving but your foot is off the gas peddle completely but you're of the clutch peddle to slow down????
What is a rock unconformity?
a break in a sedimentary sequence that does not involves a difference of inclination between the strata on each side of the break
What the break in period for a clutch pressure plate for a 92 s-10?
The clutch self adjusts, if the job was done right there is no break in period.
Can a axle cause your clutch to break on a 1999 Volkswagen Passat?
Did you break the clutch cable or the clutch disc?Clutch cables break because they just wear out. The axle can't do that.What normally causes clutch discs to fail is overstress: you pushed the clutch in without letting off the gas, downshifted at too high a speed, or souped up your engine without putting a stronger clutch in the car. Axles can't do that either.
What is the difference between a load break switch and an air break switch?
The main difference is that air break switches lack a mechanism for suppression and load break switches do have them. They are both disconnect switches but have different uses.
How do you break in a stock new clutch on a Chevy?
If it was installed properly there is no need to break it in.
What it the difference between break dancing and ballet?
break dancing lets off more energy but ballet is harder
