That would be called a Chevy 307 bored .40 over.
A 400 small block engine that is 0.060 over means the cylinders have been bored out to increase their size. The original 400 small block engine has a standard displacement of 400 cubic inches, but when bored 0.060 over, the engine's cubic inch size would increase to approximately 406 cubic inches.
The number left over in division is called the remainder.
Recombinant DNA is the product of crossing over.
It's called crossing over, and it generally only happens between homologous chromosomes.
The cool air intake is mainly to keep the engine oxygenated and allows for a higher performance and efficiency of the engine. This also keeps the engine from over heating. Its mostly performance based.
332
355
A 427 bored .60 over is 438.8572417 or basically a 439.
A 262 bored 30 over.
333
357
A Chevy 396 engine bored 0.060 over is commonly referred to as a 402 cubic inch engine. This designation comes from the fact that boring the engine increases its displacement, as the original 396 cubic inch engine is enlarged by the increased cylinder diameter. This modification can enhance performance by allowing for greater airflow and fuel combustion.
A 289 bored .030 over.
its called nothing because you wouldn't have a ENGINE left if you bored it 4" over
A 350 starts out with a 4.000" bore and a 3.48" crankshaft stroke which really only gives you 349.8 cubic inches. (Chevy rounded it up to 350) Your engine which has the same stroke of 3.48 but now is bored .030" over (making the cylinder bored size now 4.030) total size of 355.1 cubic inches or just a 355.
In the mid 300 ish Hp
355 is a non stroked just bored 4.030 over 383 on the other hand put a 3.75 stroker crank and bored honed so i would pick 383 . 355 is bored not stroked clearence for stroker crankbest engine would say is 383