0
1) What materials the conductor is made of;
2) the average cross-sectional area along the length of the conductor;
3) the temperature of a conductor also affects its resistance;
4) the length of the conductor is also very important.
Generally, the longer the conductor, the higher its resistance.
Your students' course materials can probably give you a better answer than mine, or at least you'll know it is the right one.
The length, the cross sectional area, temperature of conductor along with the intrinsic property called the specific resistance of the substance.
This are the factor which affect resistance of a conductor (1). Area of conductor (2). Length of conductor (3) Temperature (4). Type or substance of material used in conducting the electricity.
It depends on the intermolecular structure of the individual material. It varies for various material.
Generalised formula for calculating the resistance of any material is :
R = k* L/A
Where
R = Total Resistance.
K = Specific Resistance of the material.
A = cross-sectional area of material for which resistance is measured.
resistance is not affected by either voltage or current.it is either too low or too heigh
Add your answer:
Earn +20 pts
Name four factors affecting the resistance of a conductor?
area of the conductor, length of the conductor and temperature around the conductor..........
What are the factors affecting the resistance of conductors?
Conductor resistance = Conductor resistivity * Length of conductor / Cross sectional area of conductor. So. It is directly proportional to material & conductor length. And inversely proportional to the cross sectional area of conductor.
What three factors affect how much electrical resistance an object has?
Any load would do or anything that has resistance. Which is pretty much everything you can hook up to a circuit. For example, lightbulb, buzzer, resistor etc.
What are three related electrical factors did George Ohm investigate?
the answer is current, voltage, and resistance
The unprotected length of a tap conductor having a current carrying capacity equal to one third that of a main conductor must be no greater than how many feet?
There isn't a specific standard length for the unprotected length of a tap conductor in relation to the current carrying capacity of a main conductor. The length of the tap conductor is typically determined by factors such as voltage drop and local electrical codes. It is recommended to consult the National Electrical Code (NEC) or an electrical professional for specific guidance on tap conductor lengths.
What factors effect the resistance of a conductor?
Factors affecting the resistance of a conductor include the material from which it is made, its length, its cross-sectional area, and its temperature.
What is encountered by the electric current while flowing through a conductor?
The electric current encounters resistance while flowing through a conductor, which results in the conversion of electrical energy into heat. This resistance is impacted by factors like the material of the conductor and its dimensions.
What slows an electrical current?
Factors that can slow down an electrical current include resistance in the conductor, length of the conductor, and presence of any insulating materials. Resistance converts electrical energy into heat, reducing the current flow. Longer conductors offer more resistance to the flow of electrons, which slows down the current. Insulating materials can also impede the flow of electrons in a circuit.
Which factors determine the presence of electrical energy?
The presence of electrical energy is determined by the flow of electrons through a conductor, such as a wire. Factors that influence this flow include the voltage supplied, the resistance of the conductor, and the circuit's overall impedance. Additionally, the presence of a closed circuit or completed path for the electrons to flow is essential for electrical energy to be present.
What is the opposition to the flow of electrons is called?
Resistance, or electrical resistanceResistance, or electrical resistanceResistance, or electrical resistanceResistance, or electrical resistance
What are the factors of good conductor?
Factors that contribute to being a good conductor include having a high density of free electrons, low resistance to the flow of electricity, and a crystalline structure that allows for efficient electron movement. Materials like metals are typically good conductors due to these factors.
What are the factors that affect resistance?
The factors are: length, cross-sectional area and nature of substance.
What is the opposition to flow of electric charge?
The opposition to the flow of electric charge is called resistance. It is measured in ohms and can be influenced by factors like the material of the conductor, its length, cross-sectional area, and temperature.
Name four factors affecting the resistance of a conductor?
area of the conductor, length of the conductor and temperature around the conductor..........
What are the factors affecting the resistance of conductors?
Conductor resistance = Conductor resistivity * Length of conductor / Cross sectional area of conductor. So. It is directly proportional to material & conductor length. And inversely proportional to the cross sectional area of conductor.
What three factors can alter the resistance of an electrical conductor?
1) What materials the conductor is made of;2) the average cross-sectional area along the length of the conductor;3) the temperature of a conductor also affects its resistance;4) the length of the conductor is also very important.Generally, the longer the conductor, the higher its resistance.Your students' course materials can probably give you a better answer than mine, or at least you'll know it is the right one.
What are the factors that affect the resistance of a conductor?
The factors that affect the resistance of a conductor are the material it is made of, the length of the conductor, the cross-sectional area of the conductor, and the temperature of the conductor. Materials with high resistivity, longer lengths, smaller cross-sectional areas, and higher temperatures will have higher resistance.
