0
Torque specs for the Chev. 3.1 intake manifolds are as follows:
Lower Intake Manifold
Center bolts
Step 1 - 62 in-lbs
Step 2 - 115 in-lbs
Corner bolts
Step 1 - 115 in-lbs
Step 2 - 18 Ft-lbs
Upper Intake Manifold
Bolts & Studs - 18 Ft-lbs
Specs are taken from Hayes Repair Manual: Chevrolet: Lumina, Monte Carlo, & Impala (FWD) 1995 thru 2005
What else can I help you with?
What is the intake manifold torque on a Chevy small block 350?
35 ft. lbs.
How do you remove lifters from A 1998 Chevy 454?
They are under the intake manifold.
Where is the knock sensor on a 2005 Chevy Tahoe?
There are two knock sensors located in the block. They are just under the intake manifold.
Where does temp gauge hook to block On 1985 350 Chevy?
It goes to the temp gauge which is usually screwed in the head between the manifold on the drivers side, or into the thermost housing on the intake manifold.
What causes a 2001 Chevy engine to periodically lose coolant?
The intake manifold gaskets have failed on many of the V6 and V8 Chevy and GMC trucks in our fleet. The replacement gaskets are a better design that the original.
What are the torque specs on the intake manifold for a 2004 Chevy silverado 5.3l?
44 in-lbs. step one. and 89 in-lbs. step two
Where is the knock sensor on a Chevy Silverado 6.0L?
under the intake manifold
What is the torque specs for 2001 Chevy silverado 6.0 l intake manifold?
step 1 is 44 inch-lbs step 2 is 89inch-lbs.
Where are the 2 knock sensors on 2003 Chevy silverado 4.8l?
They are underneith the intake manifold. You can not see are get to them until you REMOVE the INTAKE manifold.
Where is the knock sensor a 2003 Chevy silverado 2500HD?
Under the intake manifold.
Where is the intake manifold located at on 2003 Chevy silverado 5.3?
The intake manifold is bolted on the center of the engine between the 2 Valve covers.
1996 Chevy silverado fuel pressure regulator?
It is inside the upper intake manifold.
Where is the knock sensor located on a 4.8 Chevy silverado 1500?
under he intake manifold
1993 Chevy with a 350 what do you torque the intake manifold to?
.035 FT. LBS.
Intake manifold Torque specs for 5.7 1998 Chevy pickup?
30f
Znock sensor location on a 2000 Chevy silverado 1500 4x4?
under the intake manifold
How many knock sensors does a 2000 Chevy silverado have?
It has 2 and both of them are underneith the intake manifold.
