0
NO. That is to low. If it is a good tight engine it should have at least 150 PSI per cylinder. You can not have any more of difference then 15 LBS per cylinder are the engine will idle rough.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Is 60psi a good cylinder compression for a Chevy 283?
NO. It should start at about 150 LBS. PER cylinder. And you can't have anymore then a 15 Lb. difference in any cylinder, are the engine will idle rough.
What is the individual cylinder compression for a 350 Chevy engine?
around 80 ft.llbs. or higher is usually good.
What should the compression be on a 1985 454 Chevy truck?
A good 454 will have at least 150 PSI per cylinder.
What is the compression for a 1989 Chevy TBI 5.7 in a truck?
That engine FRESH / NEW should have 150 LBS. compression per cylinder. If you have more then 20 LBS. difference in any cylinder then it is not in good shape and a good VALVE JOB is probley in the furture.
What is the inidivual cylinder compression of a 1986 Chevy 454 truck engine?
You will have to do a compression test yourself to know that. A engine that is in good shape should have at least 150 LBS. per cylinder. There can not be more then 20 LBS. difference in any cylinders. It has to have at least 100 LBS. for the cylinder to fire at an Idle.
What could be the reasons for one cylinder not working if the spark plugs and wiring have been changed on a 1989 Chevy Celebrity 2.8 liter engine?
Run a compression test before you spend too much time checking out other potential problems. If the compression tests good, try swapping the fuel injector with a good cylinder and see if the dead cylinder moves.
Why won't your 88 chevy s10 v6 cylinder fire even though the plug and wire has been tested and is good?
Do a compression test on all the cylinders. You may find a mechanical problem with that dead cylinder.
What should the cylinder compression pressure be in a good running 1996 Chevy Silvarado 5.7 V8?
i'd like to see 130-140 psi. gotta have 90 to fire.
How do you get 400 hp from a 350 Chevy?
Good compression, good heads, good cam.
350 Chevy compression?
The compression ratio of a 350 Chevy engine usually ranges from 8.0 and 9.0 to 1. This provides a good balance of fuel economy and power.
What is the minimum fuel pressure on a 97 Chevy vortec 350?
good pump, 66 psi , key on engine off, less than 60psi, hard starting, I know , its crazy...
Is 140 psi good cylinder compression for 1992 honda?
Yes very well
