0
Step by step:
1. remove the piece that goes directly on top of the steering column.. this is held by clips, no screws
2. remove the one screw that holds the dash piece that goes BELOW the steering column.. this can now drop down by pulling it - the rest is clips.
3. remove the 3 screws that are visible that hold the dash piece that goes ABOVE the instrument panel. that piece is NOT ready to be pulled off yet!!
4. begin to carefully pull that dash piece that goes ABOVE the instrument panel out until you can access a spot where the headlight switch is coming out with the panel - there will be a plastic piece that you need to push in that acts like a clip - then the headlight switch can be removed and you will see the final screw that holds the panel in place - remove that screw.
5. once you have removed the above, you can access the 4 screws that hold the instrument panel in place - remove them.
6. carefully pull the instrument panel out. if you want to completely remove the instrument panel for easier access to the lights, you will need to first remove the transmission indicator ( P N D 2 1).. this can be achieved by looking along each side of it for the clips, pushing them in and sliding the piece down off the instrument panel.
7. pull the instrument panel outwards until you can access the wire harnesses.. push the clip in and pull them out (there are 3 harnesses for the instrument panel).
8. the instrument panel can now be completely removed and you will need to flip it over to see the back of the panel. the small white plastic pieces are all labeled on the PC board - Ford even throws in some extra free bulbs if you don't have 4x4 (they install the bulbs the indicate your 4x4 status even if it will leave the factory without 4x4!).. the larger black ones are for the backlighting for the gauges - these must all be turned counter-clockwise to remove and clockwise to put back in.. they can be tough to get out and pliers can aid in turning them to remove.
9. follow the instructions in reverse to reassemble.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What type of light bulbs does a 1998 Ford Fiesta have H1 H4 or other?
A '98 Fiesta uses H7 bulbs, which comprises both your dipped beam and your main beam.
Why would the power drive light be on in my 1998 Honda Passport?
because you have the power button turned on,push the button again to turn it off
What kind of technology was used or invented in 1998?
pom poms and the banana split were invented in 1998. Technology wise, larger web-browsing was available and the Web TV was introduced in late 1998. Hope this helps!
What is crc copper block weld?
It is liquid glass and copper filaments (for reinforcement). I used it in my 1998 Nissan sentra that had a blown head gasket and after 25k mi it still runs like a champ. Be sure to flush radiator and change oil before using. Flush coolant really well.
How many inventions were made in 1998?
Ithink 41
Why would your 1998 vauxhall vectra dashboard not light up?
remove dashboard and replace 2 bulbs behind it
How do you change the bulbs in the instrument panel on a 1998 wrangler?
How do you change the light bulbs in the instrument panel in 1998 Toyota corolla
How do you change the light bulb on the passenger side of a 1998 Honda Accord 4-door?
there are many light bulbs on the Honda accord.. what light bulb?
Where is the relay for hazards and blinkers located in 1998 Hyundai Accent They faded in and out for a few days then stopped working you had bulbs replaced and no change?
The hazard and blinker lights are located behind the dashboard tray. To fix the fuse, you unfortunately had to take the dashboard out.
What actors and actresses appeared in Light Bulbs for Leaders - 1998?
The cast of Light Bulbs for Leaders - 1998 includes: Rick Herod as Sales Rep Grey Palmer as Narrator
1998 F-150 taillights don't work?
Change the tail light bulbs and check your fuses. If that doesn't work you may have a wiring problem.
How do you replace the dashboard lights in a 1998 Ford Expedition?
Check engine light is out
What do the lights on the dashboard of 1998 BMW 528i mean?
There are a variety of warning lights on the dashboard of a 1998 BMW 528i. The light with an exclamation point is the drive off assistant light and also can indicate a problem with the traction control.
How do you change the 3rd brake light on a 1998 Chevy truck?
Remove 2 screws that hold lens on, remove lens, then you should be able to change bulbs without any problems
How do you change the bulbs in the running board for a 1998 Expedition?
You get under the running boards right under the lights. there is a little plastic housing. pull this housing down and change light bulb is that easy.
How do you change taillight bulb in 1998 dodge 1500 Ram?
The tail light bulbs are accessible from underneath the back of the truck, up inside the rear of the pickup box.
How do you change the speaker in the dashboard in the 1998 concord?
You can't change the speaker it will always be a somewhat feminine male voice!!!
