0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many watts does a 15 monitor use?
A typical monitor for a pc uses about 30 watts.
How many amp does it take to operate an electric furnace?
Electric furnaces are rated in Kilowatts. The following formula will let you figure it out. Watts = amps x volts. For eg. a 10 Kw furnace draws 10000 watts. amps = watts/volts. 10000/240 = 41.6 amps. If your furnace differs from this example, just plug in your wattage and you will have your answer.
How many watts to run a furnace?
Need to know what type of furnace, electric, gas, or oil before question can be answered.
How many watts is a typical remote control car motor?
about 69
How many watts does a furnace use?
the older furnaces would draw 700 watts plus depending on the size of the blower. the newer furnaces with variable speed blowers can draw as little as 100 watts
How many watts does a kettle use?
an average typical one would use1800
How many watts does a gas furnace use?
the older furnaces would draw 700 watts plus depending on the size of the blower. the newer furnaces with variable speed blowers can draw as little as 100 watts
How many watts does a typical car alternator provide?
No more than 500 Watts RMS for the stock alternators on most cars
How many megawatts does a large coal fired power plant produce in a hour?
100 mega watts
How many watts does a average printer use?
A typical ink-jet printer such as used at home would draw around 5 watts on stand-by and 25 to 35 watts while printing. A typical laser-printer such as used in an office would draw about 35 to 50 watts on stand-by and up to about 350 to 500 watts while printing.
How many watts are in a 60 Hz microwave oven?
A typical microwave is 750-800 watts. There are lower (and higher) power machines, but the 'normal' for general use is 750-800 watts.
How many watts does a typical radio use?
I am not sure, but you can look at the back of your TV set. Most electrical equipment has its specifications there - if it doesn't state the watts, you can multiply amperes x volts.
