answersLogoWhite

0


Best Answer

It takes 1 farad for every 1000 watts so u need 2 farads.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

1 farad capacitor

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What size capacitor you need for a 1000 watts amplifier?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What power of amplifier will you need to for 1000 watt subwoofers?

Find out what the rms is for that sub woofer,if it'1000 then find out what the max is,then you could go between the rms power and the max power to get the right amount of watts.


What amplifier is needed for two pioneer 1000 watts sub-woofers?

you would need multiple amplifiers if you were using 1000 wats of subs. two amps one on each sub should work decently.


What kind of amp do you need for one 10 inch Alpine Type X subwoofer?

Alpine offered up until last year the PDX-1000 wich is a 1000 Watts RMS amplifier designed with the type X subwoofer series in mind. Now the best match would be the PDX-M12. Set the amplifier gain carefully as this amplifier is a bit strong for this subwoofer.


What power of amplifier do i need for 6 ohm speakers to connect them to my computer?

Most power amplifiers will handle a load of 6 ohms. The spec you need to look at is the power handling of the speakers. If they are rated for 100 watts program power, then look for an amplifier rated for 100 watts RMS output. Any amplifier can be connected with adapter cables to the typical 1/8" output of your computer.


How many watts does the behringer xenyx 802 have?

Xenyx 802 is not a powered mixer, you need a separate amplifier with it to drive the speakers


How much does it cost to run a 5 watts transformer?

If the transformer uses 5 watts per hour you need to know what you are paying per 1000 watts from your power company. If you pay lets say $3.00 for 1000 watts then when your transformer burns 1000 watts it cost you $3.00 your cost will be $3.00 for 200 hours run time.


Do Hyundai Multicav 3-way Bass Reflex Speakers 700 Watts need an amplifier?

Yes the as are pas iv not active


Will a jbl car amplifier 5 channels 660 watts be enough to a subwoofer of 1000 watts?

What you want to look for is the RMS of the amp and the sub. . . im going to guess that the 660 is the peak watts of the amp and the 1000 is the peak of the sub so in that case the amp would push it but not like is can be pushed. . . with 1000 watts your sub's rms is around 600 i would guess so you need an amp around 600 rms and you want to get and amp that has 2 channels so you can bridge the amp and get more power to your sub you can try that with the 660 watt amp you have and you should hear a big difference. . .


1kw how many amps?

1 kW = 1000 watts. Formula is Watts = Amps x Volts. As you can see to give you a answer I need a value for volts. Transpose the formula to read I = 1000/volts.


Do you need to use a amplifier with a cb radio?

No, and it's actually illegal to do. CB radios come from the factory transmitting four watts, which is the legal limit.


Would a 12 volt battery need to use a capacitor to run a 1000 or 760 watt amp?

I have a 760 watt amp powering 2 10" subs and it works fine. my brother has a 1000 watt amp powering 2 12" subs and he got a capacitor. So it really depends on what amp your looking at. if the 760w you wont need one, if the 1000w i would be safe and buy a capacitor. for the 1000w amp you would only need a 1 or 2 farad capacitor.


Can i use 10amp fuse for 1000 watts instant heater?

There are zero amps in 1000 watts. Watts are the product of amps x volts or I = W/E, watts divided by voltage. As you can see, that if no voltage is stated no amperage can be given. Once you find the voltage of the heater then use the following equation, Amps = Watts/Volts to find the current draw of the 1000 watt heater.