Want this question answered?
how do you tighten the door handle to a2005 Aveo
If the handle is loose on a security door, the owner should call the manufacturer, who will supply them with the tools to fix it. For security doors, they will likely send a ring shaped screwdriver, which should effectively tighten the loose screws.
The outside door handle on the driver's side is loose on the right side not the left. I found the screw for the out side left after taking the door panel off but could not find how to tighten the outside right of the handle. How is it connected ?
Take inner door panel off and the plastic deflector paper and there are 2 10 millimeter bolts that hold the handle on, tighten the bolts and your all set.
Sounds like you left a retaining clip loose on one of the pull rods.
Open the door. Remove the 12 screws inside the door around the perimeter. The front of the door will separate from the back- be careful to not let them spring apart. You may want to disconnect the black plastic control panel wire harnesses inside the door so you don't risk damaging any wires. Affixing the handle to the door is two 3/8 hex heads. Remove both screws. My handle felt loose because there is a Allen head screw inside the handle post that was loose. Needs to be tightened through the 3/8 hex thread hole with a small SAE Allen size. Reverse order for putting door back together.
Open the door. Remove the 12 screws inside the door around the perimeter. The front of the door will separate from the back- be careful to not let them spring apart. You may want to disconnect the black plastic control panel wire harnesses inside the door so you don't risk damaging any wires. Affixing the handle to the door is two 3/8 hex heads. Remove both screws. My handle felt loose because there is a Allen head screw inside the handle post that was loose. Needs to be tightened through the 3/8 hex thread hole with a small SAE Allen size. Reverse order for putting door back together.
Remove the door panel and you can see two nuts holding the door handle. Just tighten them.
There are several options to fixing a door handle if it is loose. The simplest method is to use exposed screws with a threaded spindle.
usually if you open the door, look in the door edge under the rubber seal right behind the handle you will see a screw, try to tighten it..
simply tighten it. it may be out of line now if it has been loose. to realign it you just have to adjust hinge it's really easy all you need is a socket wrench.
with a screw driver