answersLogoWhite

0


Best Answer

There is no factory kill sw installed on a cherokee. Therefore normally if one is installed the wires are cut under the steering wheel and that is where it is spliced in usually it is a large diameter wire with several small wires, usually unplugging the small wires and reconnecting the large wire will cure the problem.

User Avatar

Wiki User

18y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

13y ago

On the passengers side of the trans about even with the front of the door fan shaped switch held on by two bolts.

I suggest taking it apart and cleaning it before you think about replacing.

The switch is nearly $300

To remove, flatten out the retaining washer side under nut, remove large nut, remove smaller ( 14mm ) bolt on the adjustment side. Connector for the wires is top left of engine at the firewall, black connector with about 8 wires, you will need to snip 3 or so zip ties to get it free, the switch will slide off the bolt protruding from the trans..

cleaning is easy, 6 screws in back, pull apart, clean out all that old grease, pay special attention to the two contacts on the sweeper arm, they should move in and out easily as they have springs underneath and are the man contacts, apply new di-electric grease and reassemble.

reassemble and align before tightening, easiest way is to put trans selector in R and move switch until reverse lights come on.

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

necesito ignition switch on jeep Cherokee Laredo 1996 mi correo es skyrouse@hotmail.com

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

A 2002 Jeep Grand Cherokee does not have a kill switch.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove a neutral safety switch 93 jeep Cherokee?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the safety neutral switch on a 1995 Jeep Cherokee 5-speed transmission and Where is the safety neutral switch located?

How do you replace the safety neutral switch on a 1995 Jeep Cherokee 5-speed transmission and Where is the safety neutral switch located?


How do you repair a neutral safety switch on a 1995 Jeep Cherokee?

The neutral safety switch and backup light switch are one in the same. You have to replace it. It is located on the transmission where the shifter connects to it.


How do you replace a neutral safety switch 2002 cavalier?

Begin by removing the wiring from the 2002 Chevy Cavalier neutral safety switch. Remove the neutral safety switch retaining screws. Reverse the process to install your new neutral safety switch.


How do you replace a neutral safety switch on a 1992 Jeep Cherokee Laredo?

go to www.naxja.org or www.jeepforum.com and do a search for "neutral safety switch. There will be links to jeep owners sites that have detailed instructions


Where is the neutral safety switch on a 1994 Cherokee 4.0 liter ho?

It is located on the side of the transmission.


When removing the Neutral safety Switch on a Jeep Cherokee does the trans have to be in Neutral?

Here's a great write up on Neutral Safety Switches in Cherokees http://www.jeepin.com/features/nss/index.asp


Where is the neutral safety switch on a 1995 Jeep Cherokee Country?

either behind or in front of the arm of your brake pedal. Follow the brake pedal up until you find a box, either in front of or behind the brake pedal. You will find that the box has a button on it that is activated by your brake pedal, that is the neutral safety switch.


What does a neutral safety switch do 1998 Jeep Grand Cherokee?

It only allows starting in park and neutral and it turns on the reverse lights.


What does the neutral safety switch control in a 2001 jeep Cherokee?

It only allows starting in park and neutral, and runs the reverse lights.


Where can one find the neutral safety switch on the transmission of a 1996 Jeep Cherokee?

by the shiter lever on the tranny.


Where is a neutral safety switch located on a 2007 Jeep Grand Cherokee?

It is on the valve body inside the transmission.


How do you change the neutral safety switch on a 1999 Jeep Grand Cherokee Laredo 4x4?

the neutral safty switch is located in the trans range switch if you have an aw4 auto trans replace or clean and reinstall the switch