Twist it around and land back on zero then turn to the numbers on your combonation....
Hope this helped you at all and by the way its not that hard...
you cant you need to know the combo and have the lock open to access the combination change device if there was a way to reset a combo on a locked lock what kind of security would that be?
I had the same problem. Turn the lock to 0000 then stab the button with a pen or pencil and hold it down as you turn the lock to the new combo. Ta da your lock is now set to the new combo. Good luck :)
Lost code for bicycle lock how do i reset 4 digit bicycle combo locks og
Sphero locks cannot be reset - only resettable locks can be reset. The Sphero locks come with a permanent combo.
Lost my phone lock code. Is there a master reset #?
On the right side of it, there should be a little silver reset looking button, hold it down while setting it to the combo that you want. Let go and it should only unlock at that combo.
To reset a Lewis N. Clark 3-dial TSA002 combo lock, do the following: 1) Pull the shackle up and rotate it 180 degrees. 2) Press and hold down the shackle 3) While holding the shackle down, dial in the new combo 4) Release the downward pressure on the shackle and rotate it to the lock position and you're done
to reset it you need to turn it so that the hook is facing the opposite of the direction it faces when you lock it then put in the combo you wish to use. it should pull straight up and keep your combo in until you have it in the locking position. once in locking position, mess up the numbers so that it doesnt have your combo in it. redo the combo you chose to see if it worked. make sure you are putting the combo in where the line is.
They come preset to 0000. You open the box, then take the rubber plug out and slide the reset clip over and up. Then put the combo that you want to use on the combo pad then slide the pin back to its original position and replace the rubber plug. Now it is set to your combo.
Go to main menu, push main menu, settings, phone lock, put in ur combo, and push change combination.
You cant on those locks but you can on those locks with the numbers what you do is get a pencil and there will be a screw on the bottom of the lock and stick the pencil in then turn it and keep it in then change your code