answersLogoWhite

0


Best Answer

With a lot of cussing and a 2 jaw puller helps, you may need to heat up the output shaft. but try to pull it with out the heat.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove yoke on a 95 GMC transfer case?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Will a transfer case from a 2001 GMC Sierra fit a 2003 GMC Sierra?

YES.


Will a transfer case from a 1998 GMC Sierra fit a 2003 GMC Sierra?

NO.. They are a different type.


Will a transfer case from a 98 suburban fit a 2004 gmc?

NO.


Where is the 'transfer case encoder motor' on a 2003 GMC Sonoma?

Its on the transfer case by where the front axle connects. It's a thin case with a motor mounted on it.


Can a 2001 GMC Sonoma 4x4 be flat towed?

If you can put the transfer case into neutral (which you need either a manual transfer case or the four button electronic case), yes. Otherwise, the only way you can without damaging the driveline is to either have a manual transmission or remove the driveshafts.


What is the transfer case capacity for 2002 GMC sierra pickup?

2.3 QTS.


Can a two wheel drive 2015 GMC 2500 HD have a transfer case shift control module?

There is no transfer case on a 2 wheel drive truck.


How do you repair an oil leak at the front transfer case on a gmc sierra?

replace the seal


Where is the 4 wheel drive encoder motor located on a 1997 gmc jimmy?

The encoder motor is located on the transfer case. The transfer case is on the driver's side of the truck. It resides between the front drive line, and the wall of the transfer case.


What type of oil is used in a 2001 GMC Yukon transfer case?

automatic transmission fluid


Where can you find transfer case control module for 1994 gmc sonoma?

on right kick panel.


How do you transfer from 4 lo to 2 hi in a GMC truck?

If you have a manual transmission, put it in neutral, release the clutch, press the clutch, then shift the transfer case. By double clutching it allows the transfer case to sync up. Come to a complete stop and place the transmission in neutral. Then shift the transfer case.