0
This GMC I believe that it have a release cable under the dash. Where the brake pedal
attach with it. Every time you insert the key in ignition and turn over, you still have to
press the brake pedal that help release the cable to free the shifter. The cable the run from brake pedal to shifter could be about foot long or 3 feet long. It depend on the kind of shifter your car have. When the brake is press, it pull the cable to release the locking
device on the shifter so you can shift it. If it does not release, check the cable on the
brake pedal and the shifter for damage or defect. If it still good, check the primary cable
that runs from ignition switch to brake pedal that help release the secondary cable which
I explained above. More likely, you may need a whole steering column.
Does it help? Would you please be kind for a tips.
Hill's Towing Company
Please write to:
Anthony Hill
730 Kelton Ave. Cols.OH 43205
Anthony(Owner)
What else can I help you with?
How do you remove the automatic shifter cable from a 1997 GMC Sierra 1500?
How do you remove the automatic shifter cablein a 1997 GMC sierra 1500
In a 1997 GMC Jimmy why will the shifter not come out of park?
check that the neutral safety switch is engaging or working. this switch is usually on side of transmission u can also check for a blown fuse
What would cause your 1997 gmc safari to stick in park?
Shift interlock. Push the brake and shift into gear and if it is cold out you may have to push hard on the button on the shifter while holding the brake.
How do you know if a 1993 GMC Jimmy's four wheel drive has been engaged is there some kind of indicator light?
Yes there is. If you have the floor mounted shifter there is a bulb in the console that is in need of replacement. Remove the panel to get at it.
How do you remove a key that is locked in the ignition on a 1999 GMC Jimmy?
There is a broken wire below your shifter in the console. This controls a solenoid that releases the key. The shifter in the center consle has a part that controls a current to solenoid in your steering column. A quick fix is a nail or piece of wire to release the key. This is in the steering column. There is a pop out that must pushed in to release the key. A longer term fix to replace the part in the shifter.
Will a 1993 GMC Sonoma plow fit on a 1994 GMC 1500?
no
Does the 2007 GMC Yukon have an overdrive button and if so where is it?
Yes it's the tow button on the shifter
How can you replace the shiftknob on a 2000 gmc sonoma?
you have to cut in off the shifter its self . but there are no threads to bolt another one on so u must weld a bolt on to the top of the shifter
Is there more than one temperature sensor on a 1993 gmc sierra?
antifreeze coming from back of intake on 1993 gmc sierra
How do you fix a 4 wheel drive on a 1995 gmc sierra when the shifter will not go into any gears on a 4x4 shifter?
if there is a body lift on it then you will need to cut your floor board if not then check the linkage on your shifter if that is good then something is wrong with your transfer case
Why won't my 1989 gmc 1500 shift out of park with the key on?
When the steering wheel unlocks,the shifter sometimes does not..Turn on key,see that the steering wheel is unlocked,then turn the wheel back andforth till the shifter releases.If it won't release,the plastic component in the column is broken. . .Very rarely does the plastic break,it just gets worn,thus making it hard to release. . .Parking on a hill without the Ebrake is what causes this to wear. . .Pull the upper column apart and replace the plastic mechanism and you will cure the problem. . . . . .
What to do if your reverse light on your 1993 gmc 1500 truck won't work?
what to do if my reverse lights on my 1993 gmc 1500 truck wont work
