0
put the lifters up rite in a can of motor oil and let them sit for 30 mins
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How hard is it to replace lifters in a 1994 Chevy 1500 5.7 v8?
Not that difficult but the 350, 5.7Liter has hydraulic lifters and you must be sure the oil hole is lined up with oil hole in block
Can you miss the fuel pump rod on a 350 Chevy?
yes you can. of you tightened it up off the shaft pump damage probably occured or the shaft has bent.
What is the fuel pump pressure on a 1993 Chevy pick up 350 engine?
9 to 13 LBS. no less and no more.
Why are the lifters loud in your Chevy cavielier?
Low oil pressure. CHECK with oil pressure gauge. Worn valvetrain / Lifters are cam lobes worn. stoped up oil pump screen. Cam bearings worn. These are a few things you need to check.
What is the clearance for a valve adjustment using a feeler gauge for a stock Chevy 350 motor?
Stock 350's have hydraulic lifters, so feeler gauges aren't needed. Get yourself a Chilton's manual or similar and read up on the valve adjustment process.
Will a 1995 Chevy 350 lt1 work in a 1990 Chevy pick up?
will a 1995 Chevy 350 lt1 motor work in a 1990 Chevy pick up
Is the fuel pump on a 1986 Chevy pickup electrical or mechanical up?
The pump should be mechanical, mine is a 350 and it is mechanical, I should know it just went out last night
How can you tell if the smog pump is defective on a 1979 Chevy pick up with a 350 engine?
take the line off of it and see if it is pumping air
What is the fuel pump pressure on a 1990 Chevy pick up with throttle body 350 engine?
9 to 13 LBS. NO lower are HIGHER.
What should you do when your fuel pump on your 81 Chevy c10 small block 350 keeps burning up?
You must be talking about an electric pump. Maybe you can check the wiring to verify that it is correct.
How do you turn the fuel pressure up on your 350 Chevy?
i believe you would have to change the fuel pump.. i know that i had to replace it when changing out from TBinj to 4barrel carb
What years Chevy 350 will bolt up to a 2004r transmission?
All 350's will bolt up to a 2004r if it has the Chevy bolt pattern.
