My brinks locked in the open position. What do I need to do to get it fixed
To reset the combination on a Protege luggage lock, first, open the lock using the current combination. Then, locate the reset button or lever, usually found on the side or back of the lock. Press and hold the reset button while setting your new combination by turning the dials. Release the button to save the new combination, and test it to ensure it works before closing the lock.
There are 9999 possible combinations for the lock once you forget the combination. However, it is possible to get it open by fully locking it and then slowly spinning each wheel until it gives. Not everyone is good at this, but some people can do it quickly.
Problems resetting and lock 3-dial combo lock
You can not close any door if the locking mechanism is stuck in the locked position. You must first get the mechanics to unlock.
If diff lock light is stuck on DO NOT DRIVE IT ON THE ROAD it will break. Ensure shifter is in diff lock off position and slowly drive forward and back in a straight line.
i was roming around my ipodnano and ipressed lock and i cant get out of it and i forgot the combination and now im stuck and i did what it said on directions but didnt work
it might sound stupid but a lot of time if you force the sterring wheel to the left or right it might unlock.
Sometimes using a pair of vise grips will allow you to turn the hubs back into the FREE position.
Push the shackle down, then change the numbers. The shackle shouldn't pull up!
If your lock is a resettable kind, all you have to do is make a password that you can remember and save it. If you have a lock that cannot be resettable, look in your locks packet to find the combination or look at the back of your lock to see if it's been stuck there.
I have no idea... I recently discovered that MY lock cannot be opened for some reason. I put in the right combination but it still wont open so I could use the help as much as you can