answersLogoWhite

0


Best Answer

You need to remove the steering wheel first with a puller. There is a latch you can trip with a small screwdriver that will let the ignition switch slide out. Simply replace the switch and put the steering wheel back on.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you install ignition switch 1988 gmc truck?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you install key ingition switch 1988 Chevy S-10?

how do install key ignition switch 1988 Chevy s10


How do you change or fix an ignition switch on a 1988 Corsica when the key turns but does not actuate anything?

If your 1988 Chevy Corsica key only turns in the ignition and does not start the automobile, it is probably unfixable. Remove the ignition switch retaining ring. Slide the out and remove the wiring harness. Reverse the process to install the new ignition switch.


How do you change the ignition switch in a 1988 Chevy Camaro?

How do i change the ignition switch in a 1988 Chevy camaro


How do you remove the ignition switch in a 1988 Isuzu pickup?

how to remove lock cyliner switch 1988 Isuzu pickup


1988 jeep wrangler runs while cranking quits when you let off?

you have an open circut in your ignition switch change your ignition switch.


How do you remove the ignition switch from a 1988 Dodge Ram 50?

Ignition switch and lock cylinder removal 1988 Dodge Ram 50.Disconnect the negative battery cable from the battery.Remove the steering column cover to gain access to the ignition switch/lock cylinder.Using wire cutters, remove the cable band.Remove the bolts that hold the ignition switch/lock cylinder to the steering column.Unbolt and remove the key reminder switch and remove the switch lock cylinder from the steering column.


How do you bypass the neutral safety switch on a 1988 dodge d100 truck?

you can disconnect the starter relay and run a wire from the starter wire in the connector to the power wire on it p.s. it is easyer to take a curcit tester and probe the connectors with someone truning the ignition switch to fine the starter the starter wire is brown and im not sure about the power lead from the ignition switch


How do you install a switch interruptor commutateur for a 1988 Cadillac deville?

What is location of switch interrupter on 2001 Cadillac deville


What does the wire on the ignition key switch of 1988 Mercury Sable belong to?

I believe that wire is for the key is in the ignition warning buzzer! Not 100%, but 90%.


Where is the ignition switch located on 1988 Monte Carlo?

The key and tumbler are on the side of the column. There is a rod that goes down the column to the ignition switch. It is accessed on top of the column and half way down.


Where is he ignition switch located on a 1988 Monte Carlo?

The key and tumbler are on the side of the column. There is a rod that goes down the column to the ignition switch. It is accessed on top of the column and half way down.


Where is the fuel emergency cut off switch on a 1988 Nissan pickup truck located?

their is not one