0
How do you install a flywheel on a 1991 Chevy 350 GMC1500 truck?
Wiki User
∙ 15y ago
Remove either the engine or transmission, remove the pressure plate from the existing flywheel and examine both the pressure plate and clutch plate, unbolt the flywheel from the crankshaft and remove it.
If there are many miles on the clutch, don't even TRY to reuse it. Examine/replace the glan nut/pilot bushing as necessary and lubricate according to specifications.
Bolt the NEW flywheel onto the crankshaft.
Using a pilot shaft, install the clutch plate/pressure plate assembly. Make sure the shaft can be removed easily and that the clutch plate is centered exactly on the pilot shaft.
Install the engine or transmission.
If you haven't done one before, good luck.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Flywheel replacement for 1991 GMC1500 truck?
You will have to take out either the engine or tranny to get to it.
How do you change a flywheel on a Chevy truck?
How do you change a flywheel on a Chevy truck? You can remove either the engine or the trans. Once you have either removed just remove the bolts holding the flywheel in place.
Where is the clutch on a 1988 Chevy truck?
It is bolted to the flywheel on your transmission
How do you torque when installing flywheel in a 1979 Chevy truck?
with a torque wrench
How many labor hours for a flywheel on a 96 Chevy truck?
It will take and experience mechanic six hours to replace your 1996 Chevy truck flywheel. A novice mechanic will take several more hours.
Will a 2006 Chevy truck fly wheel fit a 1999 Chevy blaver?
no, different trans and size of flywheel
What is the the starter for a 1996 Chevy truck 8 cylinder?
In front of the flywheel, on the right side of the vehicle.
How do you install a steering stabilizer own your Chevy truck?
1952 chevy truck does not have a steering damper, where and how to mount steering damper on my 1952 chevy truck .thanks jim
Is it possible to install a steering column from a 1999 Chevy truck in an '82 Chevy truck?
not likely but good luck trying
How do you Install tow truck bed on to Chevy truck 2500?
can a tow bed be wielded to frame of a truck or does it have to be boilted down
What will cause a vibration on the whole truck that can be felt mostley when the truck is in park the truck is a Chevy Silverado 2005 Diesel automatic?
most likely it is a cylinder missfire it might be a broken flywheel (cracked)
How do you install the factory stereo for 1992 Chevy truck?
u have to go to the shop and buy it and pay the shop to install it
