Make SURE that the breaker bar (3/8th NOT 1/2 inch) is long enough or you will pinch the handle or your hand when you release the tension. If you are careful, and keep control of the belt you can remove it completely over the fan blades without removing the upper radiator cover. the entire process should take 10-15 minutes. When installing the new belt, route it as the diagram on your truck indicates, but have the Alternator be the LAST pulley you slip the belt over. if not, you will have a hard time getting the belt on the tensioner and hold the tensioner all the way open. I do not have a 1995, but almost all serpentine belts have an idler pulley to keep tension. You take a breaker bar and turn the idler pulley nut releasing tension and then you can slide the belt off.
a pully underneath the alternator moves with an end wrench. turn the nut clockwise and the belt will loosen up
This might be helpfful. How do you Change a fan belt on 94 prizm?
serpentine belt for 97 7.4 454 Chevy truck
need diagram for 1994 chevy truck serpentine belt?
It has been a awhile and I had the dealership do it. I belive that they had to remove the radiator.
Not if you have a serpentine drive belt............
How do you change a serpentine belt on 2006 Envoy
There is a special tool I saw in a pawn shop that is just for that.
This is the escort forum not the E 150 forum.
how do you change serpentine belt gm 3.4 2003 venture
How Do I change the serpentine belt on a 1989 Cadillac Eldorado ?
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?