0
It is not adjustable, sealed from the factory. DO NOT FULL WITH IT
There is no conventional idle adjustment for the TBI motors, but if your willing you can advance or retard the timing by rotating the distributor housing a couple of degrease, but not to much. This will raise or lower your RPM a bit.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you idle up your Chevy truck?
For non fuel injected models, on the side of the carburetor there is an idle screw. Turning the screw slightly will raise the idle on your Chevy truck.
Why do you have Rough idle 5.7 Chevy truck?
vacuum leak?
Why won't your 1990 Chevy idle?
1990 gmc p/u 5.7 wont idle showing code 12
93 Chevy truck will not idle down?
check the ait. on yhe left side of carb..it control's idle.
Why does a 1996 Chevy truck 2500 shake in a idle and almost turn off?
it has a low idle. Can also be a vacuum hose leak.
What causes surging idle in a 1990 Toyota truck?
Separation of the ethanol due to water in the gasoline.
How do you advance timing on a Chevy 350 and idle it down?
It depends on the year. If you can't get the idle down, check for vacuum leaks. That seems to be a primary cause of high idle, especially for the TBI engines.
What is the idle on a 1992 Chevy truck with a 350?
1500 at first until it kicks down to 850 rpm
How do you adjust idle for 1990 Chevy 1500 350 V8?
It could be the Idle Air Control (Idle speed control) valve. Its located on the left side of your TBI and has an electrical connection.
Where is the iat sensor on a 95 Chevy truck?
A 95 does not have a idle air tempture sensor, It was not used on that year, no need for one.
How do i addcheck transmission fluid on my 1995 Chevy silverado?
While the truck is running in idle pull out the dip stick and read it.
How do you reset idle on 1990 Chevy lumina 3.1?
It shouldn't need reseting? Probably controlled by the PCU (Computer)
