what kind of hydraulic oil should be used for a massey furguson 245
Permatran III
8 gallons
Use Massey Ferguson hydraulic oil or an equivalent due to the unit having a wet brakes and clutch, regular hydraulic oil will give you problems down the road.
When you pour it in the crankcase fill spout.
30 weight non detergent oil. 8 gallons
30 weight non detergent oil. 8 gallons
A MF 231 holds about 9 gallons of hydraulic oil and is added via a plug in top of the transmission housing.
sae 90 gear oil. it is 100% mineral oil. napa, car quest, call your local massey dealer they have it. you will pay a little more but they have all the answers.
The hydraulic oil dipstick on a Massey Ferguson 4245 is typically located on the right side of the tractor, near the rear of the transmission housing. It may be found near the hydraulic reservoir, often marked for easy identification. To check the hydraulic oil level, simply remove the dipstick, wipe it clean, reinsert it, and then remove it again to check the level. Always refer to the operator's manual for specific details and maintenance guidelines.
A MF 231 holds about 9 gallons of hydraulic oil and is added via a plug in top of the transmission housing.
Hydraulic fill is on top of the transmission but be sure to remove both drain plugs at the trans and back end as they are connected before refilling.