To adjust the hydrostatic linkage on a Ranch King Pro mower, first, ensure the mower is turned off and on a flat surface. Locate the adjustment linkage under the mower, typically near the hydrostatic transmission. Loosen the adjustment nut and make small adjustments to the linkage length as needed, then retighten the nut to secure the setting. Finally, test the mower's movement to ensure it operates smoothly and make further adjustments if necessary.
Chances are that the brake is stuck. If the brake pedal is up then the linkage is probably stuck. Follow the rod from the brake pedal to the arm on the side of the rear axle. You should be able to push the arm forward and the brake will release. A little penetrating oil on the linkage where it pivots will help keep it from getting stuck again for a while. Just make sure you don't get it on the actual brake pads right behind the linkage.
yes
Ranch King is merely a brand name...the maker....MTD Products, Cleveland, Ohio.
MTD
Any good lawn mower repair shop should be able to order just about any brand of mower part for you. Good luck.
Need owners manual for ranch king pro riding lawn mower!
You can change the drive belt, on your lawnmower, by loosening the tensioner pulley. With the tensioner pulley, loosen the drive belt will come off and can be replaced.
5L74 gates
An MTD brand made for 20+ years. What is the actual question?
under a plastic cover, next to the carb,
A diagram can be found in related links.
Well then, yes, you might be a redneck...