sounds like air leak so take a can of starting fluid and spray on the intake and air lines if idle picks up then pin point that spot and that's what u fix
Comtact Sean Hyland Motorsports. He specializes in modular Ford engines.
Mobile One Synthetic for High Milage engines
The 5.0 L ( 302 cubic inch ) High Output V8 , Ford started using the 4.6 L - SOHC in 1996 in the Mustang GT
I believe from 1983 to 1995 in the Ford Mustang - fuel injection was available starting in 1984 , and then the 5.0 L used in the Ford Explorer from 1996 to 2001 has the same firing order as the high output
Fan blower motor?Hi-speed relay badSwitch?Motor winding bad
Many people use gasoline engines. Most new engines require only 5W - 30 oil mutiviscosity for comfortable driving. For older engines you can choose 10W-30 or 10W-40. Heavier multiviscosity oils such as 20W-40 are for high rpm, high-load applications mainly but avoid using it in extreme weather.
In a 1978 Ford Mustang II : There were ( 3 ) engines available depending on the model : A 2.3 liter / 140 cubic inch four cylinder A 2.8 liter / 171 cubic inch V6 and A 5.0 liter / 302 cubic inch V8 ( non High Output )
For Mustangs with factory-installed 289 High Performance engines, the vehicle serial number is stamped into the right-hand side of the block near the battery's negative-cable attachment point.
220 horsepower for the high output 302 in a 1988 Ford Mustang
not car engines, but other engines used for industrial purposes can have that high of a capacity.
Consumption is high compared to other engines. becomes half a liter per 1000kms and increases if driving is extremely slow in city traffic.
well my 11 yr old mustang geling can jump a 5 ft high round pen fence with ease! It's amazing!