because your appliance is connected to the L1(secondary coil1) and your meter reading voltage is on the other coil (secondary2)
It is called Mutual Induction !
Between the 2 coils on the secondary side of TRANSFORMER
I wish i could draw it out
The voltage range should be marked on the appliance but 127 v is ok for a 120 v appliance.
If it does not come with a plug on it, no. If it is made for direct wire, then 99.9% chance is that it is a 240 volt unit. If you plug it into a 120 volt outlet your water will barely get warm.
If the plug fits you are good to go. The typical range of residential voltage is from 110 to 125 VAC. You are fine within this range.
Because it is a 220 volt outlet instead of a 120 volt outlet. Now, if this is a standard 120 volt outlet that is reading 209 volts then someone has made a mistake in the wiring. You need to call an electrician to straighten this out.
Answer for USA, Canada and countries running a 60 Hertz supply service.Need to know the voltage of the outlet plug. On a 120 volts outlet there is one hot terminal and on a 240 volt outlet there are two hot terminals.
120 volts
yes but it will not be as good eg if it is a phone charger it will take longer to charge
Yes you can. Most electrical appliances will work if supplied with power that's within 10% of their voltage rating.
yes
If it does not come with a plug on it, no. If it is made for direct wire, then 99.9% chance is that it is a 240 volt unit. If you plug it into a 120 volt outlet your water will barely get warm.
Take the plug in your hand, and insert the plug into the wall outlet.
No conversion needed. These are nominal voltages which range from 110 to 120 volts. It will operate fine on the outlet.
If the plug fits you are good to go. The typical range of residential voltage is from 110 to 125 VAC. You are fine within this range.
Because it is a 220 volt outlet instead of a 120 volt outlet. Now, if this is a standard 120 volt outlet that is reading 209 volts then someone has made a mistake in the wiring. You need to call an electrician to straighten this out.
Yes you can safely do this. Most appliances that are marked 115 volts will operate on outlet between 110 and 120 volts safely.
Use a volt meter Plug a 120 volt accessory into it
Nominally 110 to 120 volt power strip is okay to connect to a standard outlet.
The pin configuration of the 240 volt receptacle is different from a 120 volt pin configuration. This is a safety factor to prevent the wrong voltage being applied to the wrong devices.