Yes. The two voltages are a nominal figure. The lower range of voltages can go from 110 to 120 volts. All equipment rated within the ranges from 110 to 120 volts are all compatible with each other. This ten volt range is brought about by the power company, as they have a responsibility to keep voltages within a certain 10% range. The load will only notice a difference of 1% on the load current. e.g. Wattage load of 2400. Amps = watts/volts. 2400/110V = 21 amps. 2400/120V = 20 amps. On a constant resistance as the voltage goes lower, the current goes higher and vice versa as the voltage goes higher, the current goes lower.
If you plug a 115 Volt device into a 220 Volt circuit, you are putting double the voltage potential through the device. Some devices may endure double the rated voltage for more than a few seconds, but most will fail almost immediately.
That includes an air conditioner motor.
If you have any questions or concerns about the electrical current for your air conditioner, contact a local electrician or handyman, if they are allowed in your state.
Receptacles don't matter, these are connectors only. If the Plug and Receptacle match, they can be plugged. CAUTION: You cannot plug a 110V A/C in a 230V receptacle if the current supplied behind the receptacle is 230V, it will seriously damage your A/C and can cause fire as well.
You can easily measure the current supply by getting a 110/220V simple detector from a hardware shop. Mine has 2 sets of lights in it, if only one glows then it is 110-120V, if both lights glow then it is 220-240V current.
If still in doubt, get an electrician to help you out. Good Luck
It won`t or should not have fit. No,,, It will burn up
I've had a 115V Frigidaire window unit plugged into my standard 110V wall socket for a few years. Works great!
No, a 230 volt AC requires two phases of electricity and also a different type of plug.
Only if you like sparks, smoke and don't want the 115 volt device anymore. This is a bad and dangerous thing to do and the plugs shouldn't be compatible.
Yes. The wall outlet in your home (U.S.) is actually 120 volts and not 110 as most people assume. You may have to change the outlet if the plug on the A/C will not work.
can you plug a 115 volt into a 110 volt
No adapter is needed, 110 and 115 volt are interchangeable.
Sir, i will not go by watts because it can take many hundreds of watts per outlet but it also depend on the size of the wire in the outlet the bigger the number the more watts.
Probably not, but I have yet to see a 150 volt appliance as this is a non-standard voltage. If you are referring to a 115 volt appliance then the answer is yes you can as 110/115/120 volts tend to be used interchangeably in practice and are close enough together to not affect operation of the appliance.
I have never seen a 100 Volt rated outlet. Usually outlets would be rated for 110 to 120 volts for residential use, or maybe 150 volts. The rating is separate from what voltage the outlet is providing. If your outlet is supplying 100 volts, as measured by an accurate voltmeter, you have some problem in your wiring or a faulty outlet. If there is only 100 volts at the outlet get an electrician to diagnose the problem if you are not completely familiar with home wiring. In general you should never use an outlet that has a voltage or current rating less that the device will consume.
Yes
Absolutely not. The plugs are incompatible for a reason. The unit will be fried and a fire may result. Find a 115 outlet.
can you plug a 115 volt into a 110 volt
Doesn't sound like a good idea to me.
Yes the 115 volts you read is just the maximum it will handle.
No adapter is needed, 110 and 115 volt are interchangeable.
Sir, i will not go by watts because it can take many hundreds of watts per outlet but it also depend on the size of the wire in the outlet the bigger the number the more watts.
Probably not, but I have yet to see a 150 volt appliance as this is a non-standard voltage. If you are referring to a 115 volt appliance then the answer is yes you can as 110/115/120 volts tend to be used interchangeably in practice and are close enough together to not affect operation of the appliance.
115 Volt and a 110 Volt can be treated as the same thing. The electrical voltage supplied from your electric company is not exact and can be 120 Volt + or - 10%.
I have never seen a 100 Volt rated outlet. Usually outlets would be rated for 110 to 120 volts for residential use, or maybe 150 volts. The rating is separate from what voltage the outlet is providing. If your outlet is supplying 100 volts, as measured by an accurate voltmeter, you have some problem in your wiring or a faulty outlet. If there is only 100 volts at the outlet get an electrician to diagnose the problem if you are not completely familiar with home wiring. In general you should never use an outlet that has a voltage or current rating less that the device will consume.
15000btu is the largest and that's a 115 volt basically the same ,you just need a higher breaker is all
120 Volts and 115 Volts refer to the same thing in the US. Residential electricity is provided at 120 Volts from the utility. High current devices such as motors are often rated at less than the supplied voltage (such as 115 Volts) because it is expected that there is a small amount of voltage drop in the circuit feeding them. The National Electric Code allows a 5% drop in voltage from the electric service so a 5 Volt drop from 120 Volts is OK.