0
Not without producing a new ring gear and pinion gear to suit the changed tooth angles when it's flipped. These are made by www.subarugears.com
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you replace a starting ring gear on 1992 Isuzu trooper?
Take out the transmission and there it is. The flywheel holds the ring gear for the starter. If your ring gear has been obliterated by your starter you have an issue with how the starter engages the fly wheel to begin with. Proper clearances, alignment and securing of your starter will make your trooper whole agian.
What is the flex plate on your 1997 Plymouth Breeze?
It is the ring gear and plate that conects your engine and automatic transmission's torque converter.
How do you get a gear ratio?
count your teeth on your ring gear <big gear> and on you pinion <little gear> and the divide the ring gear teeth by the pinion
How many teeth on a ring gear and pinion gear for 4.10 gear ratio?
41 teeth on the ring gear, 10 on the pinion gear.
Starter gear is to far away from ring gear?
There are two sizes of ring gears on small block chevies. You probably have the starter for the large ring gear but need the starter for the small ring gear.
What if your Mitsubishi 3000gt jumps out of reverse gear why?
Usually (on a manual transmission) it is the reverse ring gear that sits in the rear of the transmission in the 5th gear sychro. The springs that holds it in place usually wears out due to heat and use that the gear gets damaged and no longer makes contact enough to lock into place. Or the case itself has become damaged and is misaligned. Also check your cables before pulling the ring gear out. Sometimes they go out of adjustment and can cause the same issue. Hope that helps.
How many teeth are on a ring gear and pinion for a 3.07 gear ratio?
43 ring gear 14 pinion
Where is the transmission fill on a 1970 vw beetle?
Transaxle gear oil is serviced through a large 'female' hex plug on the left or driver's side of the transaxle by the ring gear cover plate.
WHAT Size of ring gear for a 1971 Chevy Nova?
These cars came with a 10 bolt, 8.5" ring gear and an optional 12 bolt 8.875" ring gear.
How many teeth does a 3.73 gear ratio ring gear have?
ring gear 41 pinion 11 41/11 = 3.7272727272
On a 03 ranger what is that thin gear next to the ring gear?
It is a pinion gear.
What is used to connect the pinion gear to the wheels?
ring gear
