Best Answer

increase the efficiency of the system

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: A typical induced draft furnace uses a blower off delay in cooling mode why?
Write your answer...
Still have questions?
magnify glass
Related questions

A fan or cooler relay is used in electric furnace to change the blower speed to the speed for cooling?

A fan or cooler relay is used in electrical furnace to change the blower speed to the blank speed for cooling

A 3ton air conditioner has what size gas heater?

It could have any size heating furnace, the two are unrelated except for the size blower used in the furnace to support the 3 ton cooling system. But the fact remains you can get a 3 ton blower in 50,000 btu furnace, a 100,00 btu furnace and anything in between.

We have central heat and air. Does the furnace blower unit power on for the AC system too or is there a separate blower?

There should be only one blower to move the air. The unit will have a coil for cooling and a heat exchanger.

How is a 2 speed furnace blower supposed to work?

A 2-speed furnace blower typically operates at a lower speed for energy efficiency during mild weather, and switches to a higher speed for increased airflow during extreme temperatures. The speed is controlled by the thermostat, which signals the blower to adjust its speed based on the heating or cooling demand.

What is a balanced draft and how is it controlled?

furnace equipped with FD(force draft) and ID(induced draft) fan /blower are called balanced draft system.Fd used to regulate combustion airflow while ID used to regulate furnace pressures type of furnace operate slightly below ATM pressure .

What is the power consumption of a gas furnace blower?


When furnace turns off blower will continue to run?


Is the air handler the furnace?

Yes it is. It contains the blower.

Where do i add sae 10 non detergent oil to my furnace blower motor?

To add the sae 10 non detergent oil to your furnace blower motor you will have to open the motor section.

Is there a diagram for adjusting blower speed on a ruud furnace?

Yes, It`s on the inside of the blower compartment cover panel.

Where can one find a furnace blower motor?

Furnace blower motors are easily found at HVAC installers and repair centers. However, without proper knowledge, a customer should not try to fix this, it can be dangerous.

Which central heating system involves a furnace and a blower?

Forced air heating