answersLogoWhite

0

A brake drum that is cracked should be?

Updated: 4/28/2022
User Avatar

Wiki User

12y ago

Best Answer

replaced

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: A brake drum that is cracked should be?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What causes back end wobbling when braking?

worn out pad, warped rotor, broken brake caliper (or cracked drum, if drum brakes)


How do you repair drum brake on 1994 gmc sierra?

Brake drums can be resurfaced by turning the brake drum in a brake drum lathe. When the brake drum has deep grooves in it, it cannot be repaired.


What is the function of a drum brake?

A drum brake is a brake that uses friction caused by a set of shoes or pads that press against a rotating drum-shaped part called a brake drum. The term drum brake usually means a brake in which shoes press on the inner surface of the drum.


Should there be a groove in the brake drum of 96 Pontiac sunfire?

no


Is driving with a cracked brake drum dangerous?

Yes, it's very dangerous. The brake drum is made from cast iron which is very brittle. If that crack opens up and spreads, it could cause the brake shoe to bind and put your car into a skid. Rick http://free-auto-repair-advice.blogspot.com/


What is the function of brake drum in brake system?

The brake drum is the part which applies friction to the tire and allows your car to stop. It is a very important component of your braking system and should be maintained.


When you brake your car makes a knocking noise at the back right of the car?

With rear drum brake:-The brake drum may be out of round or may have a rust spot in it. -The brake drum may be cracked.With rear disc brake:-The brake disc may have extreme lateral runout or be mounted improperly. -The brake disc may be cracked. This would be dangerous-Combination of soft brake pads and a directional finish on the disc surface. A directional finish may go away with use and take the noise with it.Regardless of brake type:A brake disc or drum mounted to a bent hub flange or bent axle shaft can cause this noise.


What is the function of a drum?

A drum brake is a brake that uses friction caused by a set of shoes or pads that press against a rotating drum-shaped part called a brake drum. The term drum brake usually means a brake in which shoes press on the inner surface of the drum.


What does squeeking brakes mean?

Drum brake? Could indicate a build up of excessive dust in drums -remove drum and clean Disc brake? wear indicators are letting you know it is time for replacement pads. Could also be a sign of cracked or glazed brake pads/shoes. Have your brakes inspected soon.


How do you remove a froze up brake drum on your 1970 charger?

You will have to get a brake spoon and from the backside of the drum pull out the rubber plugs and look inside and you will see a gear wheel, the wheel needs to be turned downward to back the brake shoes off from the drum and then the drum should come off.


What are the two main components of the drum brake system?

The drum and the brake shoes.


How complicated is drum brake removal?

If you do not know how to do this then you should leave it to a mechanic. Replacing drum brakes is not an easy task anyways.