owners manual, owners manual does not have a diagram in it, and there is no diagram under the hood
5w30
13.2
You need 54mm bore bolts for a caliper for a 1998 Chevy Prism.
usually serpentine belts get their tension(tightness) from the belt tensioner
1.8L 4 cylinder
The serpentine belt pattern for a 1998 3.5L Isuzu Trooper can be obtained from the car manufacturer upon inquiry. Isuzu is responsible for this information.
This diagram is under the hood. Look for it
You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.
www.teamzx2.com
If the horn does not work in the 1998 Chevy Prism and the vehicle was purchased used in this condition, it is quite possible that the previous owner cut the horn wires to stop the annoying security alarm. It is also possible that the fuse for the horn is blown.
the starter is located under the intake manifold you can't miss it
A 1998 Chevy Prism's idle speed is computer controlled. You will have to take it to a garage to get it set. However, the idle speed could be altered if, say, your spark plugs are seriously worn. Changing them may restore the original idle speed.