0
Chamilia beads are fully compatible with Pandora bracelets. Both companies use a 3mm sterling silver chain and the beads from either company will fit the bracelet of the other. The one difference between the two bracelets is that Pandora has designed theirs with two stations over which locking beads can be clasp. These beads act as "stoppers" which keep the other beads on the bracelet grouped into sections. Chamilia's bracelet does not have these predetermined stations Instead they have designed their locks with a silicone core that compresses on the bracelet to keep the bead stationary. These locking beads are called "Freedom Locks" because they give you the freedom to place them wherever you wish.Biagi by Unodomani is another line of Europen bead jewelry that is compatible with both Chamilia and Pandora.
Yes,your answer is right.
Pandora jewelry is the origial,and then chamilia,biagi,troll beads,lovelinks come out.Many of them are very same.especially for the material and skill,all of them are made by lampwork glass or glass and 925 sterling silver and 14K gold.Wich one you want to choose,just up to your interest.Now most of them are made from China.
edit: Actually Trollbeads was created in 1976 while Pandora was created in 1982, and Chamilia in 2002.
edit: According to Michaels Jewelers, Chamilia beads will not fit as well on Pandora bracelets, i was told that the bracelets had to get cut off to save the bead, it got stuck.
Wiki User
∙ 13y ago
Wiki User
∙ 11y agoYes, Pandora beads will fit on a chamilia bracelets, but not necessarily vice versa. chamilia bracelets beads do not have the threading inside so they may get stuck on the threaded sections of the Pandora bracelet.
This is why I bought a chamilia....almost every bead out there from different manufacturers will fit.yes.if you want to buy more Pandora beads,view:http://www.bracelet-bead.com
Wiki User
∙ 13y agoThey are comparable in term of size and quality. Pandora is more into traditional design while Ohm Beads is more fun design. They compliment each other well.
Wiki User
∙ 13y agoSuperior design!
Wiki User
∙ 11y agoyes
Add your answer:
Earn +20 pts
Are Ohm beads the same as Pandora and troll beads?
No. Trollbeads is the original bead company, founded in 1976. Pandora and Ohm beads are similar, but copied the idea, as many other companies have.
Is 4 ohm better than no ohm?
Don't know if 4 ohm is better than no ohm. I know that 4 dollars are better than no dollars.
If you have two 75 ohm resisters one 150 ohm resistor and one 300 ohm resistor in a series circuit which one will cause the largest voltage drop?
Ohms law is: V = I x R (voltage = current x resistance) ... therefore the larger the resistance the larger the voltage drop across that resistance.
How do you connect 2 6 ohm speakers to an 8 ohm amplifier?
You can, but its power output will be a bit higher than its 8 ohm rating.
What is ahigher resistance 10 ohm or 1 kilo ohm in other words does 1kilo ohm have more or less resistance than 10 ohm.?
Because 1 kiloohm is 1000 ohms. 1000 ohms is a higher resistance value than 10 ohms.
What is resistance if less than 1 ohm?
1 Ohm represents nearly no resistance to current flow, at all. The word, Ohm is usually capitalized as it comes from a person's name.
Why is it better to use the kilo ohm rather than an ohm rage of resistors?
For smaller values (eg below 1000), simply use ohm, for biggers (above 1000000) use megohm, between them use kilo-ohm.
Is an 8 ohm sub woofer better than a 4 ohm sub woofer?
no the higher the ohm the more resistance in the speaker the lower the resistance the more power it will use so if they are the same make the 4 ohm should be louder
Can i make 4 ohm output amp switch to 8 ohm..?
There is neither 4 ohm nor a 8 ohm output of an amplifier. Less than 0.5 ohm is the output impedance of a loudspeaker amplifier. Scroll down to related links and look at "Voltage Bridging or impedance bridging - Zout < Zin".
Can an 8 ohm amp drive 16 ohm speakers?
Never heard of a 16 ohm hifi aplifier. All amplifiers have an output impedance of less than 0.1 ohm. We use always impedance matching with a low source impedance to the much higher load impedance. Scroll down to related links and read "Amplifier, Loudspeaker, and Ohms".
What is international standard for electrical grounding?
Less than 1 Ohm.
What is a unit used to measure resistance?
The " Ohm " is. 1 ohm is the resistance across which 1 volt of EMF appears when the current through it is 1 Ampere.
