The check engine light (service engine soon) comes on and stays on when a problem is detected by the self diagnosis system of your vehicle. Generally, the problem is in the emissions or something that is affecting the effectiveness of the emissions, but other causes can trigger the light to come on, too. To determine the cause, the vehicle will need to be taken to a parts store or a shop that has an OBD2 scanner, or for 1995 and earlier models, an OBD1 scanner, While a scanner will not give you the magic answer, it will give you a code that narrows down the problem area.
this is for safety so engine does not get ruined,check oil level!!
If the check engine light is illuminated, start with scanning for codes.
The light could come on for a number of reasons. The vehivle would have to be hooked up to a scanner to determine the engine code or codes. After you determine the codes you can isolate and fix the probelem. If the check engine light is on there will be a computer code that will appear on the scanner.
That would work on cars before 1995 but it will not now. The computors have more knowledge and have to be reset with a scanner.
That is what the check engine light is for. It informs you of a failure.
something wrong with something in your power steering more than likely, get it checked out.
autozone will scan codes for free.to see what is wrong!!
YES
Unless you have a scanner or the equalivant then you think you reset it when in reality you have only had to reset the clock.
A flashing check engine light is an indication of a severe engine misfire.
No, low gas cannot cause a Check Engine light to turn on. There would have to be a problem within the engine or the engine wiring for that light to come on.
Yes, it is possible as you may have a miss. That miss would turn on the check engine light.