answersLogoWhite

0


Best Answer

The kitchen faucet tap is threaded and is kept stationary by an upward force from the water supply. A sudden surge of pressure from somewhere else in the pipeline releases the pressure on the tap allowing the tap to move freely. While there is still a little pressure remaining on the tap it will of course take the path of least resistance and open up a little. This seems to happen more frequently as the tap threads continue to wear. Wow that answer above??? My guess is that you have a Moen faucet they are known to do this when subjected to high line pressures and the pressure fluctuates. Check your line pressure with a gauge it should be 80 psi or less or you need a pressure reducing valve installed. The faucet probably needs the cartridge replaced. == Answer== The delta two handle faucet will do the samething. And i think any washerless faucet could do it. Replace seats, spings and cartridges.

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why would a kitchen faucet turn itself on when using the washer or outside faucets?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What could be the reason for not getting water from the kitchen sink faucets when there is full water pressure on all the other house faucets?

The water valve under the sink is turned off or has gone bad. It is possible that there is a blockage in the faucet itself. I'd start by ensuring that the water valve is turned off, and take the faucet apart and look for anything out of the ordinary.


What would cause a kitchen faucet to turn on by itself?

Nothing, it can not do that .


How many gallons of water does a kitchen faucet use?

The faucet itself does not use any water. The rate at which the water leaves the faucet is dependent on the make of the faucet.


How does one apply a pull out kitchen faucet?

Installing a pull out kitchen faucet is really just as simple as installing any other standard faucet. The only real difference is that the faucet itself has a feed in line which connects to the water source inside the base cabinetry.


Kitchen faucet leaking - has lifetime warranty - how does it work?

A lifetime warranty only lasts for the life of the company that sold you the faucet and may not cover every component of the faucet. In general, if you have the warranty you can send the faucet back and they will send you a new one provided that the defect is covered. (Some leaks, however, may be caused by things other than the faucet itself.)


Why would a faucet turn on by itself?

Loose spindle


How can you clear out corrosion clogging your faucets without tearing your pipes apart?

The clog may be at the faucet itself. If the faucet has a screen, try removing that first. If no screen, or nothing is found in the screen, the clog may be something lodged in the faucet's valve or the flexible tubing connecting the faucet to the pipe. If clearing these doesn't solve the problem, your best bet is to replace the pipes going to that faucet. Best of luck. I had old black iron pipes in my house with so much corrosion that there wasn't a large enough hole for a pencil in what was originally 3/4in pipe. I ended up replacing all the plumbing in my house.


What is the whistling or steam sounding noise coming from behind your bathtub spout and faucets?

One of the supply lines has a hole or the faucet itself. You probably have seen the water by the time you get this. You probably have to shut the whole house off, most tubs don't have their own shut off valves.


Water will not turn on after opening valves under sink?

Often there will be debris in the line that clog the screen in the spout. If not that, it may be in the faucet itself. With single handle faucets or two handle that are quarter turn valves, it takes very little to block the hole that water comes through.


How many times has a faucet turned on by itself?

Never happens.


You replaced the cold water nipple on your hot water heater now you have NO water pressure at all?

1- Are you sure all the valves are fully open? 2- When opening the valves did yo take the precaution of opening them very, very slowly to prevent any sediment inside the piping to become dislodged and block the piping?


Why is water hot in kitchen and cold in shower?

because the water in the kitchen heats up faster because there is less water coming through the faucet that has to be heated up. but in the shower you have to heat up a lot more water and so it takes longer.Both kitchen faucets and a shower body have seats and the seat diameter is approximately the same for both types of faucetsShowers like kitchen faucets also have restricted flow in many areasThe New showers have a single handle and anti scald devices and pressure balancing thus if the valve is not adjusted seasonally you can get severe temperature fluctuations. Also depending on the developed length of the piping you do have ambient temperature considerations to consider as the piping does give off heat