0
pressure chamber used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C (249°F) for around 15-20 minutes depending on the size of the load and the contents
Wiki User
∙ 8y ago
Wiki User
∙ 10y agoBasically both are use for sterilization by wet heat, the mechanism of action is same but hydroclave is use in sterilization of waste because of the volume of sterile material is lower than the volume of non sterile material that you inserted.
Thymol Autoclave Ind...
Working Principal of Autoclave Autoclaves can also be used to take out all kinds of industrial processes and scientific experiments that work best at high heats and pressures.
All autoclaves work with a combination of steam, pressure, and time. They operate using principles similar to the common kitchen pressure cooker — that is, the door is locked to form a sealed chamber, and all air within that chamber is replaced by steam. The steam is then pressurized to bring it to the desired sterilization for the desired duration.
Wiki User
∙ 14y agoAn Autoclave is a steriliser, used to sterelise instruments before an operation.
Wiki User
∙ 8y agoAn autoclave is a pressure chamber which treats the contents with high pressure steam in order to sterilize them.
Wiki User
∙ 14y agoIt is the process in which things are treated in high pressure and high temp. It is done to sterlize the things we want i.e. to kill all possible microorganism present in that thing.
Wiki User
∙ 11y agoAn autoclave sterilizes materials.
Wiki User
∙ 11y agokillng of microorganism and their works
Add your answer:
Earn +20 pts
What is 15 pounds pressure in autoclave?
Steam autoclave's work at 30 to 35 PSI, the previous answer of 15 PSI is for a pressure cooker. A pressure cooker cannot be used as an autoclave, the temperature is not high enough to cause sterilization. Anything less than 121C / 250F (30 PSI) is incapable of killing microorganisms. Also the pressure vesal of a pressure cooker cannot handle the added pressure needed to sterilize, IE: adding weight to the release valve will just cause the cooker to explode (so don't try it).
What is the best practices of sterilization?
Vasectomy and ligation if your talking about fertility. Autoclave if sterilizing materials.
What are the Advantages and disadvantages of heat sterilization on medical equipment?
They are different sterilization methods for medical instruments, consumables, devices and Implantable devices. Depending on the nature of the product to sterilize is the method used.Sterilization can be achieved through application of heat, chemicals, irradiation, high Pressure or filtration.Heat Sterilization is divided in two categories:Dry Heat SterilizationMoist Heat sterilizationDry heat sterilization of an article is one of the earliest forms of sterilization practiced. Dry heat, as the name indicates, utilizes hot air that is either free from water vapour, or has very little of it, and where this moisture plays a minimal or no role in the process of sterilization.Methods Used:Hot air ovenIncineration or BurningFlammingRadiationMicrowaveThe most used in the medical field is "Hot air Oven"Moist Heat Sterilization as the name indicates, utilizes hot air that is heavily laden with water vapour and where this moisture plays the most important role in the process of sterilization.Methods Used:Water bathPasteurization (milk)BoillingSteam SterilizerAutoclaveThe most used in Medical Field is "Autoclave"Hot Air Oven Advantages and Disadvantages.They do not require water and there is not much pressure build up within the oven, unlike an autoclave, making them safer to work with. This also makes them more suitable to be used in a laboratory environment. They are much smaller than autoclaves but can still be as effective. They can be more rapid than an autoclave and higher temperatures can be reached compared to other means. As they use dry heat instead of moist heat, some organisms like prions, may not be killed by them every time.Autoclave Advantages and Disadvantages.Moist heat coagulates the proteins in any organism and this is aided by the water vapour that has a very high penetrating property, leading to their death. It also causes oxidative free radical damage This can even, at high enough temperatures (vide:Autoclave), kill prions.These are widely used to sterilize articles that can withstand high temperatures and not get burnt, like glassware and powders. Linen gets burnt and surgical sharps lose their sharpness.Hope this answer will usefully.surMedical.com Team n
What is paper used for today?
paper is used for writing on and can also be used for oragamy
When was science used or is being used to make decisions?
It's used when predicting the weather, learning about what happened on the earth before there were humans, its used in computers, its used to learn more about the human body. Science is used for A LOT!
What is autoclave paper?
paper that is used to wrap items that are placed in an autoclave for sterilization
What water do you use in an autoclave?
Demineralised water should best be used in an autoclave.
What is difference between autoclave and oven?
In simple words, autoclave is a pressurized oven.
What do you put in a autoclave?
An autoclave is used to sterilize medical instruments. They have a reservoir to hold the distilled water that is pumped or drained into the chamber.
Which chemical is used in klintex paper?
aper used in evaluation of autoclave
What is an autoclave reactor?
a reactor is generally termed as an autoclave reactor,when it is a high pressure batch reactor.mostly this kind of reactors are used for sterilization the reactants..
What is autoclave expansion apparatus used for?
For Testing of soundness of cement.
What is a Sealed vessel used for carrying out chemical reactions?
Autoclave
What is the function of autoclave in the laboratory?
It is used for sterilizing laboratory apparatus.
Why is autoclave used in beauty salons?
To sterilize sponges, brushes ect
How do you test the efficiency of an autoclave in microbiology?
An Autoclave is a piece of equipment used for sterilization purposes and requires quarterly calibration. There are three types of calibrations to be done - timer, temperature and pressure. To calibrate the timer, post an appropriate correction factor directly on the autoclave. Post a correction factor on the autoclave control panel if the temperatures were different, and for pressure post a correction factor on the autoclave if it is not true.
What are the parts functions of autoclave?
The function of an autoclave in a microbiology laboratory is to sterilize the growth medium used in the laboratory without breaking down certain necessary nutrients required for the growth of microorganisms.
