answersLogoWhite

0


Best Answer

In electronics, telecommunications and computer networks, multiplexing (short muxing) is a term used to refer to a process where multiple analog message signals or digital data streams are combined into one signal over a shared medium. The aim is to share an expensive resource. For example, in electronics, multiplexing allows several analog signals to be processed by one analog-to-digital converter (ADC), and in telecommunications, several phone calls may be transferred using one wire. In communications, the multiplexed signal is transmitted over a communication channel, which may be a physical transmission medium. The multiplexing divides the capacity of the low-level communication channel into several higher-level logical channels, one for each message signal or data stream to be transferred. A reverse process, known as demultiplexing, can extract the original channels on the receiver side.

Multiplexing technique is designed to reduce the number of electrical connections or leads in the display matrix. Whereas driving signals are applied not to each pixel (picture element) individually but to a group of rows and columns at a time. Besides reducing the number of individually independent interconnections, multiplexing also simplifies the drive electronics, reduces the cost and provides direct interface with the microprocessors. There are limitations in multiplexing due to complex electro-optical response of the liquid crystal cell. However, fairly reasonable level of multiplexing can be achieved by properly choosing the multiplexing scheme, liquid crystal mixture and cell designing.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

15y ago

A process of combining multiple signals or data into one.They can be of different types viz. *Time division mutiplexing *Frequency division multiplexing *Wavelength division multiplexing *Code division multiplexing

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

The purpose of multiplexing is to provide a model where two end points can reach open multiple full duplex connections to the other endpoint in an environment where only one of the endpoints is able to open such a bidirectional connection using some other facility.(e.g, a TCP connection.)

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

The range of frequencies is limited, but the number of devices using the system fluctuates. One way to separate the different data streams is each one have it's own frequency (like different radio or TV stations broadcasting).

This works fine when there are a limited number of users. Radio and TV are one-way, so there are a limited number of stations broadcasting. But with cell phones, broadband wireless and other services, the frequency spectrum is crowded. To have multiple users share the same frequency without walking over each other, multiplexing is used so that each user gets its data transmitted in packets. There are various methods of multiplexing available.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What does multiplexing mean?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What do you mean by multiplexing the bus?

If you have less no of data than the no of bits of data or address to b transfer Multiplexing mean to manage given busses in such a way that data or address can be transferred perfectly


Which of the three multiplexing techniques arre used to combine digital signals?

Frequency-division multiplexing, wavelength-division multiplexing, and time-division multiplexing.


Which of the three multiplexing techniques are used to combine analog signals?

Frequency-division multiplexing and wavelength-division multiplexing


What is mean by orthogonal frequency code division multiplexing in wireless communication?

Orthogonal frequency division multiplexing is special case of frequency division multiplexing where a ling serial data streams are divided into parallel data streams and each data stream is multiplied either by orthogonal frequency or code. when multiplied by code known as frequency code division multiplexing and when multiplied by orthogonal frequency then know as orthogonal frequency division multiplexing


What is the Block diagram for time division multiplexing?

What is multiplexing and its diagram


Why amplitude division multiplexing is not used?

what is function of amplitude division multiplexing


Application of multiplexing in data communication?

application of multiplexing in data communication


Which multiplexing technique transmits digital signal?

In analog transmission, signals are commonly multiplexed using frequency-division multiplexing (FDM)


What is downward multiplexing?

Downward multiplexing refers to distributing a single signal across multiple channels.


What is the definition of the word 'multiplexing'?

Multiplexing is the process of combining multiple signals over one media line. There are several types of multiplexing: frequency division, time division, and wavelength division.


What is multiplexing why is multiplexing needed in electronics communication?

multiplexing refeers to the transmission of different signals in the same channel simultaneously. There are many forms of multiplexing that can be used, including frequency division multiplexing(FDM) where individual signals are transmitted over adjacent , non overlapping frequency bands. they are transmitted in parallel and simultaneously in time. In time division multiplexing(TDM) each signal is allowd to use the whole bandwidth for a certain period of time. Multiplexing is needed so that the available channel can be used efficiently and also to save costs. There is too much to know about multiplexing, here is just a short overview. One thing that one has to know is multiple access.


Name the various types of multiplexing techniques?

Multiplexing techniques vary widely based on what is being multiplexed. Modern telecommunications use a very wide array of techniques including: TDM - examples: TDMA, T-carrier FDM - examples: DWDM Spatial - example: MIMO Code division - examples: CDMA Phase or polarization division - cable/satellite TV Statistcal - examples: packet mode (STS), FHSS etc etc. This is far from a complete list. I think the question needs to be more specific.