Why is anything called by whatever its named? Because someone once blurted the sound out while referencing the object and said that would make a good name for this thing. Perhaps because it has tines that pierce at least two different directions like a fork in the road.
At the risk of stating the obvious: the point of a fork is to transfer food to your mouth.
Perhaps you are referring to the tines.
They are called "tines".
A prong on a fork is called a Tine
A projecting point or prong of a fork is called a tine.
You will first need to fill the fork completely with fork oil. Fork should be collapsed with the fork spring removed. Bleed the air out of the inner cartridge by slowly cycling the damper rod through it's full stroke. From this point you can set the oil level to the correct height measured from the top of the outer fork tube. Factory specs are: Minimum Height: 155mm Standard Height: 139mm Maximum Height: 117mm
A berry fork or a carving fork. Also a disposable two pronged fork can be known as a cheese fork or a chip fork shfork
5 pounds of pressure
A fork
Fork and knife
A fork is s fork. A spork is a spoon ending in short fork tines.
pork fork
10w fork oil. 130-140 ml from top of fork, when fork is fully compressed without the spring inside the fork.
the metaphore of fork what is it?
If you can read this, you are probably not a fork.