0
Why if you replaced the cap and rotor spark plugs and wires ignition coil and ignition control module in the disributor do you still not get spark at the spark plugs?
Wiki User
∙ 15y ago
== == check that you are getting power to the distributor. i am assuming you are talking about a earlier model vehicle
Have you checked the ecm relay?
maybe the pickup coil assy.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you change the Ignition Control Module in a 1995 Blazer S-10?
Remove the wiring harness from your 1995 Chevy Blazer ignition control module. Remove the ignition control module retaining screws. Reverse the process to install your new ignition control module.
What if your 86 bronco ll will not start evn though you have replaced the battery and ignition coil?
it could be the control module
Where is the location of the ignition control module on a Ford Focus?
You can find the Ford Focus ignition control module beneath the drivers side dashboard. The ignition control module will be above the accelerator pedal.
Where is the ignition control module on a 1992 Crown Vic?
Where is the ignition control module located in my 1992 Crown Victoria
Where is the ignition control module in a 1997 mercury villager?
The ignition control module sit directly below the distributor.
Where is the ignition module on a 88 tracer?
ignition control module is under the distributor cap
Were is the ignition control module on a 2001 Mercury Sable 3.0 dohc?
Where is ignition control module on a 2001 mercury sable
Where is the ignition and distributor located on a 1990 Chevy Celebrity?
The 1990 Chevy Celebrity engine is distributorless, the ignition is handled by a combination of the engine control module(computer) and the ignition control module. You did not mention which engine the car has. If your car has the 4 cylinder engine the ignition control module is below the intake manifold at the rear of the engine. You can follow the spark plug wires to it. The coils are mounted to the ignition control module. If your car has the V6 the ignition control module is near the starter and again you can follow the spark plug wires to it. Again the coils are mounted to the ignition control module.
Where can i get ignition control module for Mercedes Benz 300SE?
A Mercedes-Benz 300SE ignition control module can be obtained from most Mercedes-Benz dealerships. The ignition control module, can be purchased at most auto-parts stores.
Where is the wcm on a 2006 dodge magnum?
The ignition switch is part of the WCM (wireless control module).The ignition switch is part of the WCM (wireless control module).
Where is the ignition control module 1997 Chevy cavalier 2.2 L?
where is the ignition control module loacted on a 1997 chevy cavalier
Where is the ignition control module on a 1997 Sonata?
Regarding a model 1997,2 liter sonata, there is not an ignition control module as such. Ignition control comes from the ECM (ELECTRONIC CONTROL UNIT) through the Ignition Power Transistor (often called Igniter) and then to the Ignition coil.I do not have any information on the 1.8 or the 3.0 liter models.
