0
Why does your 1991 Chevy 1500 run fine at idle but stall when you accelerate?
Updated: 9/15/2023
Wiki User
∙ 15y agoBest Answer
Need to check the fuel pump pressure with a gauge.
It should have no less then 9 LBS at adle, and at least 13 LBS off idle and no higher.
9 to 13 PSI factory specs.
Wiki User
∙ 15y agoThis answer is:
Add your answer:
Earn +20 ptsQ: Why does your 1991 Chevy 1500 run fine at idle but stall when you accelerate?
Write your answer...
Submit
Still have questions?
Related questions
What is the overall height width and length of a 1991 Chevy 1500?
What is the overall height, width and length of a 1991 Chevy 1500?
Will a 1991 Chevy 1500 transmission fit into a 1998 Chevy 1500?
yes, V-8 ???
What type of transmission is in a 1991 Chevy silverrado 1500?
That would be the 700R4
What transmission is in your 1991 Chevy 1500 4x4 v8?
700R4 from the factory.
What is the length of a nv3500 transmission from the front of bellhousing to the rear seal in a 1991 Chevy 1500 2wd?
The length of the 1991 Chevy 1500 transmission is 37 inches. The bell housing will account for approximately 5.5 inches.
Can a 1994 Chevy 1500 2 door rwd rear axle take the place of a 1991 Chevy 2 door 1500 rwd?
1988 through 1999 Chevy TRUCKS have the same chassis
Where is the fuel pump located on a 1991 Chevy silverado 1500?
It is inside of the fuel tank.
Where is the fuel pump located on a 1991 Chevy 1500 Silverado Suburban?
In the gas tank.
Where is the diagnostic plug for 1991 Chevy 1500?
It is under the edge of the drivers side dash.
Will the front clip of a 1993 Chevy 1500 bolt on to a 1991 GMC 2500?
yes
Where is the starter located on a 1991 Chevy 1500 5.7L?
follow the red wire from the battery
How do you replace heater core in a 91 Chevy truck?
replace heater core in a 1991 Chevy work truck 1500
Copyright ©2024 Infospace Holdings LLC, A System1 Company. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Answers.