answersLogoWhite

0


Best Answer

When you sand a spot on a wall you remove the paint that area, causing the surface to absorb the your top coat at a different rate than the rest of the wall. To reduce or eliminate this problem always prime any area after you sand in order to seal the spot.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

Yes. Although the paint may appear to look good without sanding it will not adhere properly. By scatching the surface with sanding you make give the surface a better chance of holding the paint.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

There are very few paints that should be sanded after painting.

Most good quality paints will not have any stickiness, although latex takes somewhat longer to fully harden than some other materials.

Urethane and polyurethane and certain varnishes may retain some tackiness after coating. Light sanding with steel wool or sandpaper (220 or 320 grit) can remove some of the tackiness. It will also remove the gloss.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

to make it more smooth. you cant paint on bumby wood and you might need to sand the wood if you are going to stain the wood to make it look more neater

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

Because if you sand afterward, you'll sand all the varnish off, and if you don't sand at all, then you've got a rough piece of wood with chunks sticking out all over it.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

yes?

This answer is:
User Avatar

User Avatar

Anonymous

Lvl 1
3y ago

Using a pressure washer to remove paint is definitely beats the old garden hose, scrub brush and TSP cleaning method, a task so slow that many people just skip it. Connect the pressure washer to the outdoor faucet through an ordinary garden hose, attach a nozzle (see “Selecting the Best Nozzle,” below) and start the engine. Wear goggles to keep paint chips and dirt out of your eyes, and clothing that can get soaked. You WILL get wet. Spread old sheets or painter’s cloths on the ground and over shrubbery to catch paint chips.

Pressure washers look like the ultimate squirt gun, but they aren’t toys. Don’t point them at anyone or try to rinse your hands or feet. They can tear your skin right off.

Finally, make sure you get a Telescopic Spray Wand from bestcargurus  to help reach high areas. A Telescopic Spray Wand extends the range of your pressure washer by up to 18 feet. Allowing you to reach those spots that you couldn’t reach before. Reach your sidings, windows, gutters and more! Clean areas you could never reach before!

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why do you need to sand before painting?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Do I need to sand down my bedroom dresser in order to paint it?

It is strongly advised to sand your dresser before painting if you want a uniform coat.


What is the Best painting choice to cover up bad drywall joints?

Painting isn't going to cover them, it is just going to give them color. You need to mud and sand them smooth, then prime before you paint.


I am looking for a tole painting teacher in the Sandpoint area..?

If you need a tole painting teacher in Sand Point, visit www.craftsitedirectory.com


How to do Base preparation on interior wall before painting?

repair any cracks or holes with plaster or filler and sand smooth. lightly sand the wall to increase adhesion of new paint. if covering a dark wall with a lighter colored paint, cover wall with primer before painting.


Do you need to texture the dry wall before painting?

No,you do not.


What skills and tools would be needed to make cave painting?

Tools would be needed to make cave paintings: sand water hands skills you need to make a cave painting are: intelligance art skills


What is a sand painting.?

healing ceremonies


What is sand painting?

healing ceremonies


What is sand painting A a part of navajo healing ceremony B a rawhide design C a part of a potlatch ceremony D a painting on a clay pot?

A sand painting is a painting on a clay pot. This is known as fine art.


Do you need to sand stairs when painting over oak?

u probably should, either way would work but to acheive the best look i would go ahead and sand 'em


Why were most dry paintings created?

A dry painting technique is sand painting which the Navaho Indians use as part of a ritual, after which the painting is destroyed. There are also tourist versions of sand paintings made for sale.


Should you sand before using oil base paint?

Use a good primer, then you don't need to sand.