I assume it is the bathroom sink. Is there hot water in another sink in the house? In old steel pipes I have run across ones that get so rusted on the inside that water can not get through them. If anything has been done to the hot water line anywhere in the house, sediment or rust may have broken loose and plugged the fixtures.
Well then either=1- get a heater with larger capacity OUT put or storage==2- Install water conserving devices as the sink would use a lot less water then a tub or shower=
The plaming tubes are all conected.When the cold water run in kitchen the cold water at the shower become less,so with less cold water at the mix cold-hot (the balance is desterb),making the water hoter.Same if you turn on the hot in the kitchen the water will be colder in the shower.
the water is hot. when we get out we're hella cold
On single handle shower valves, designed to let cold water first and turn handle farther to mix hot water to desired setting. If hot water turned on first, possibility of getting scalded. If seperate hot/cold handles for shower, shower valve needs work.
When you take a shower, you're mixing a combination of hot and cold water to make a comfortable temperature for the shower water. A toilet draws only off the cold water system. In older or poorly designed plumbing systems, when you flush the toilet, the cold water is pulled by toilet, so the water coming through the shower is only drawing from the hot water tank.
A malfunctioning water heater can cause hot and cold water to surge through the shower heat. A faulty water pump can also cause this problem.
a cold shower
If you rinse your hair with cold water before getting out of the shower/bath it will stop it from going static when you try to style or brush it, this works for me! (:
A 'Triton Electric Shower' is a shower that can draw on a cold water supply and heat it on demand. It differs from other showers in the fact that it can use cold water and heat it itself, instead of relying on a boiler to heat the water first.
This is probably a pressure imbalance problem or you have air in the lines. see the related video link provided.
Run a new cold supply line from the source. This will drain less pressure from the the cold shower line.
Take a cold shower.
Yea I do! Im glad that you asked, im just a little confused. Do you work for the shower company? I dont see another reason why you would ask the question.....umm well my shower is okay and the cold water is------okay im sorry i just cant get this lingering thought out of my head. Why did you ask this?