0
Why are small wooden-looking granules falling from a corner of your ceiling?
Wiki User
∙ 14y ago
check for termites
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Why do ladybirds gather in a corner of the ceiling?
So they are hidden from humans and cant get hurt
How did Descartes think of the coordinate planes?
It is said that he was ill and in bed. He looked up at the ceiling where he noticed a fly. He figured out that knowing the distances from a corner of the ceiling along the two adjacent sides of the ceiling will uniquely identify its location. So, if the corner of the ceiling was the origin and the two adjacent sides were the axes, you have the Cartesian plane.
What are vertical lines?
Vertical lines are lines that are drawn / made perpendicular to the horizon. In other words, they go "ceiling to floor", not "wall to wall" or "corner to corner."
What does it mean if a dog is growling because of random or invisible things such as a ceiling fan or the corner of a room?
a dog can see ghost's, so he might be growling at one telling it to get out. but if he is growling at the ceiling, he might be playing.
Where in a bedroom would you find a right angle?
The corner. Where the floor meets a wall. Or the ceiling meets the wall. In the window sill. In a door way.
What is the falling action of the corner of the universe?
In "The Corner of the Universe" by Ann M. Martin, the falling action occurs after the climax when the main character, Hattie, reconciles with her brother Adam and begins to deal with the changes in their relationship. Hattie also learns to cope with the idea that her brother might have different abilities and experiences of the universe.
When a beam of light is falling on prism surface and bend then which force is apply on its corner?
The trick behind this is that light is photons, which are massless.
In the falling sand game how do you get sands to stop falling?
all you do is in the bottem right hand corner it says sand oil ect. all you do is click on it until it gets to 5 and the click once more and it stops
How do you cut joins of ceiling cornices?
www. creativecornicing .com has pre-cut corner pieces for cornices. all you need to do is glue the pieces together. no more battling with mitre cuts.
How do you cut crown molding when you have a angles ceiling?
Consolidated Builders here... to help you visualize the concept...when looking at your radial arm saw imagine the fence is you ceiling corner but upside down....make a line on the saw as reference on how you hold the material at true 45 degree. i prefer to cope my work. www.consolidatedbuilders.org
When incense stick is lightend in one corner how its fregrance go corner?
I think I understand the question. If an incense stick is smouldering in one corner of a room, how does the scent arrives at a corner diagonally opposite? It is all do to warm air rising. As the warm scented air rises from the stick, it can't rise further than the ceiling. So the scented air is convected in a curl through the room, with the scent dropping down as the air is cooled.
How do you frame a tray ceiling?
Determine how large of a 45 degree angle you wish to have where your walls meet your ceiling. Cut an appropriate number of 2x4s with a 45 degree angle on both sides all the same length. Its nice if you can place these 16" on center, but 2' on center is acceptable. Hold one in place at each corner of the room and make pencil line on the wall at the bottom tip of the 2x4. Snap a chalk line on the wall between the pencil lines. You can do the same thing on the ceiling if you wish. follow these lines and you'll wind up with a straight ceiling. Make sure you attatch these 2x4s straight up and down to a wall stud and the corrusponding ceiling joist or truss. It gets complicated when you get to a corner. You need to establish a " ridge beam" from the chalk lines that meet in the corner on the wall to your 2x4s that meet on the ceiling. this will require 4 compound miter cuts. comtinue running the 2x4s on layout into the corner but instead, connect them from the wall to the newly established "ridge beam" these will also require a compound miter on one end. Then have a sheet rock party. If the corners sound too intimidating, do every thing else and call in a pro to finish the corners. at least you'll save money anyway. Make sure the pro is aware of your plan on how you're going to install the tray ceiling before you begin, he may have additional bracing or a different way all together. Hate to have all your work wasted. Hope this gives you somewhat of an idea
