The first recorded instance of sandpaper was in 13th century in China when crushed shells, seeds, and sand were bonded to parchment using natural gum. and beelieved to be made By Indians
For pure sanding of bondo or metal, No. If you are preping to paint or sanding primer you should use Wet or Dry sandpaper and sand wet.
because it has a smooth out the landscape
Richard G. Drew, who had developed masking tape in 1926, took the idea a step further, and on May 27, 1930, he and his employers at the 3M Company received a patent for cellophane - aka scotch - tape. 3M's main product before that was sandpaper. Drew was delivering sandpaper to auto manufacturers, and saw that they were having trouble keeping a neat line between the colors on two-toned cars. He came up with an adhesive tape that would lift easily off the car, without lifting the paint at the same time. When he then invented the transparent cellophane tape, it became a consumer favorite.
Sandpaper is abrasive enough to smooth most wood furniture.
You will get a better result using drywall mesh cloth, 2 grades about 120 and 180.
Sharkskin was originally used as Sandpaper. When modern manufacturing techniques came, sandpaper was mass produced.
Um...Sandpaper??I am not sure but i would prefer Sandpaper....?
Sandpaper is both helpful and harmful.
Um...Sandpaper??I am not sure but i would prefer Sandpaper....?
That is A coarse sandpaper, It is generally used before A fine sandpaper.
sandpaper, coffee maker , see you later, Kennedy kaper
Traditionally, sandpaper was made of paper impregnated with tiny crystals of quartz or garnet. The finer the particles, the smoother the sandpaper was. While that type of sandpaper is still widely available, most modern sandpaper is made with aluminum oxide, which is much longer lasting.
Aboriginal name for sandpaper fig is noo-ni.
The correct one is "coarse sandpaper".
3M sandpaper can be purchased from your local hardware store, DIY stores or online. Shops such as Bowdens or Wickes will have a large range of sandpaper available.
For pure sanding of bondo or metal, No. If you are preping to paint or sanding primer you should use Wet or Dry sandpaper and sand wet.
the sandpaper has more friction