answersLogoWhite

0


Best Answer

best bet is to contact Danby who will let you know if part is covered by warranty and will inform you of local dealer to obtain parts from. Recently replaced broken wheel and hose faucet connection. Danby referred to dealer. IF problem with Dealer, Danby deals with it.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Where you can buy a connector hose for a danby counter-top dishwasher?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change the coolant distributor hose connector on a 2000 Jetta?

Unhook hose and connect to new connector very simple.


Why did hot water hose bust to dishwasher?

if it is a braided hose, it just deteriorated due to age.


Is it ok to run the garbage disposal when the dishwasher is running?

Yes. Your dishwasher discharge hose is probably hooked into the side of the disposal. Running your disposal will not hurt the dishwasher.


How do you fix a stripped connector for a garden hose?

Someone would go to the hardware store to purchase a stripper connector replacement for a garden hose to fix it first. Then he or she would use pliers to connect the stripped connector to a garden hose and then it is fixed.


When your dishwasher drains the water comes out the aerator what is wrong?

The sink drain is plugged,or you have the dishwasher hose hooked up in wrong place.


Why does the water from the disposal side of the double sink drain into the dishwasher?

Probably the drain hose from the dishwasher isn't high enough to keep the water from running back . The hose should be above the level of the disposal at some point. Some states require an "air gap" which is a device that is placed in the drain line to prevent this. Some states require a simple high loop in the drain hose. Many dishwasher manufacturers are now installing backflow preventers in the dishwasher.


While running the PMCS checklist you notice a broken connector on a water hose you should?

replace the connector


How do you make built in dishwasher portable?

You would have to put a casing around it, find a different incoming water hose, and adapt the drain hose.


How do you know if the dishwasher hose that goes to the airflow is clogged?

If if won't pump all water out, the d/w hose or sink drain is plugged.


Siemens dishwasher will not drain?

If the dishwasher is hooked into a garburetor, there is a plug in the garburetor where the hose drain attaches that needs to be knocked out. The drain hose might be plugged where it joins to the plumbing drainage. The other problem, plumbing-wise, is the drain hose has to be fed as high as it can go under the sink and back down into the drain.


How do you disconnect a dishwasher?

Shut the electrical breaker off and lock it out. Undo the drain hose under your sink. Shut off the water supply under the sink to your dishwasher.Take the bottom front panel off the dishwasher. Undo the water supply attachment to your dishwasher. Open the door to your dishwasher and take out the screws attaching the dishwasher to the counter. Undo the electrical connection to the dishwasher. Slide the dishwasher out. You may have to adjust the legs to get the dishwasher out. If you have a new dishwasher to install, read the directions for installing it, do the reverse to take the old one out.


How do you cap a garbage disposal that you have disconnected a dishwasher from?

Fit a short length of capped hose to the disoposal fixture.