Follow the top radiator hose, fronm the radiator, to where it ends at the motor. This housing, that has two bolts, accross from each other, holding it down, is the housing for it. Remove the two bolts, and there it is.
The thermostat is located on the engine of a 6.0 vortex 2000 Chevrolet Silverado 2500. The thermostat can be found by following the upper radiator hose directly to the thermostat.
The thermostat is locating in the waterpump, where the lower rad. hose connects.
It goes up.
It depends on what temp. thermostat is in it.
you blow it up
The 1995 Chevy Silverado coolant sensor is located on the front of the engine. The coolant sensor will be a few inches above the thermostat housing.
YES. The spring set's down into the intake.
Assuming a V8 engine, it's on the top, front of the engine. The thermostat housing is where the top radiator hose goes into the engine.
It is screewed into the intake manifold right beside the thermostat housing.
The spring goes down in the engine
it depends on the engine but check where the lower hose ends closest to the engine
follow the upper radiator hose it would be right at the end of that