On the 2.5L, it is under the intake/exhaust on the back of the engine.
On the 3.0L it is below the exhaust manifold on the front.
are you sure its not rusted? cause me 92 Plymouth acclaim's oil pan rusted, and i had to get a new one. it only cost like 3-$400.
My 1991 Plymouth Acclaim manual says mine is R12, but I can't say for the '92 It was built with R12, should be retrofitted to R134a.
2783 lbs for the base model
Chrysler/Plymouth/Dodge vehicles do not use inertia/reset switches.
Plymouth Acclaim was created in 1989.
The Starter relay for Acclaims are located right on the starter, its what the wires that go to the starter hooks to.
starter on 2.5 4cyl is located on back side of motor by drivers compartment easyest to get to from under car.
No. A 1991 Plymouth Acclaim does not have an interference engine.
Your problem is prob the starter, if you hear grinding it def is, Tho if starter is good could be ignition relay
On the 2.5L, it is under the intake/exhaust on the back of the engine. On the 3.0L it is below the exhaust manifold on the front
what are the vavle timing mark's for a 1994 Plymouth acclaim
The fuel pump is inside the fuel tank on a Plymouth Acclaim.